RemoteMaster v1.97 is now available!

Discussion forum for JP1 software tools currently in use, or being developed, such as IR, KM, RemoteMaster, and other misc apps/tools.

Moderator: Moderators

Post Reply
gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:
Contact gfb107

RemoteMaster v1.97 is now available!

Post by gfb107 »

I've built and released RemoteMaster v1.97

Available downloads are: Changes for v1.97
  • Fix Unicode characters in string literals
  • RMIR:
    • Fix for keymoves when AdvCodeBindFormat=LONG
    • Upgrade jp12serial communication library to version 0.14
  • RM:
    • Fix for shuffled function hex when switching protocols and there are named functions without hex
Links:
The RemoteMaster project home page, now accepting donations.
RemoteMaster.v1.97.zip
RemoteMaster.v1.97.exe - See note below.
Change Log (also included in the downloadable files)
Readme.html (also included in the downloadable files)
Tutorial (also included in the downloadable files)

Notes:
Last edited by gfb107 on Tue Apr 27, 2010 7:18 am, edited 1 time in total.
Top
WagonMaster
Posts: 363
Joined: Thu Apr 16, 2009 2:25 pm

Post by WagonMaster »

I've tested 1.97 and all of the changes in the new release are working as expected. Nice job, Greg. Thanks for the fixes!

Regards,
Bill
Top
vickyg2003
Site Admin
Posts: 7109
Joined: Sat Mar 20, 2004 12:19 pm
Location: Florida
Contact:
Contact vickyg2003

Post by vickyg2003 »

Greg, I've been using RM quite a bit this last week, and just wanted to say what a nice tool this is. At some point you "told" me that RM was a more intuitive than KM. I never appreciated that statement, because I hadn't worked with the complicated protocols. But I just muddled my way through a couple of Pioneer upgrades and a Nec 4dev Combo and I must say that RM really shined when dealing with those complicated protocols. Thanks for all your hard work.
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Top
gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:
Contact gfb107

Post by gfb107 »

You are most welcome. And thank you for the feedback.
Top
mdavej
Expert
Posts: 4636
Joined: Wed Oct 08, 2003 7:08 am

Post by mdavej »

Greg,

I think I've found a bug in 1.98beta4. If you start a new upgrade, NEC1 protocol and enter a device number like 133, the fixed data does not change. If you then save or change tabs, the number disappears. If you enter 0133, it works fine. The subdevice box has the same issue. I was using the 15-133 RDF.
Top
gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:
Contact gfb107

Post by gfb107 »

Sounds like the same thing reported here.
Top
gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:
Contact gfb107

Post by gfb107 »

RM v1.98beta5 is now available, with a fix for the protocol parameters.
Get it at RM Downloads
Top
mdavej
Expert
Posts: 4636
Joined: Wed Oct 08, 2003 7:08 am

Post by mdavej »

Greg,

This version isn't working very well for me. It appears to ignore the remote type in my RMDU files and just uses whatever remote I used last. I get the same result with every file on 2 different computers. Any ideas?

This is the java version BTW, not the exe.

Thanks
Top
mdavej
Expert
Posts: 4636
Joined: Wed Oct 08, 2003 7:08 am

Post by mdavej »

More info. I see that it also ignores the remote model I pick from the dialog if it can't find a match when it loads. I tried a fresh install on XP and Vista with the same result. Beta4 works fine.
Top
gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:
Contact gfb107

Post by gfb107 »

Try Beta6:

RemoteMaster.v1.98beta6.zip (Windows, Linux 32/64)
RemoteMaster.v1.98beta6.exe (Windows only)
Top
vickyg2003
Site Admin
Posts: 7109
Joined: Sat Mar 20, 2004 12:19 pm
Location: Florida
Contact:
Contact vickyg2003

Post by vickyg2003 »

Hi Greg, Device Combiner issues appear to be fixed as well aas the memory leak when scrolling.

Thanks for the fix!
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Top
mdavej
Expert
Posts: 4636
Joined: Wed Oct 08, 2003 7:08 am

Post by mdavej »

Works great now, and seems to load files really fast. Thanks, Greg. And I like the direct download link in your post too. Nice work.
Top
mdavej
Expert
Posts: 4636
Joined: Wed Oct 08, 2003 7:08 am

Post by mdavej »

Greg,

I just noticed something in 1.98beta6. THIS upgrade of mine is NEC1 device 133.237 which worked fine a few versions ago when I first created it. However, when I open it now in RM, I get device 307.567. Seems to be doing similar things with other NEC protocols as well (combo, etc.).

Thanks
Top
gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:
Contact gfb107

Post by gfb107 »

Please try RM 1.98beta7
Top
mdavej
Expert
Posts: 4636
Joined: Wed Oct 08, 2003 7:08 am

Post by mdavej »

Thanks, Greg. Works great.
Top
Post Reply

Return to “JP1 - Software”