canalplus hd wifi

stepheire · Post by **stepheire** » Mon Sep 26, 2011 10:11 am

tell me is works

eferz · Post by **eferz** » Mon Sep 26, 2011 10:35 am

stepheire wrote:do you think is possible to change the remote control to be like the original black and white
it s the same at the canalplus cube the other hd box, i saw it on the choice to set up the remote but it was not working. i dont some kind of mod style.
http://www.fredcavazza.net/2008/10/20/d ... l-le-cube/[/url]

Brandon C and Alan Richey have achieved great results in creating customized remotes skins for the Slingplayer Desktop and Web Slingplayer. For more help and information, you should consider checking out this thread: http://placeshiftingenthusiasts.com/for ... mote-skin/

stepheire · Post by **stepheire** » Mon Sep 26, 2011 11:40 am

http://www.picturetrail.com/gid23898488
sorry ,got trouble on the first upload

alanrichey · Post by **alanrichey** » Tue Sep 27, 2011 2:08 am

That doesn't look like any remote image that Sling have produced, so we can't go down that route, but looks relatively simple to design yourself. You just need to adapt the one I built at https://www.hifi-remote.com/forums/dload ... le_id=8833

stepheire · Post by **stepheire** » Tue Sep 27, 2011 3:55 am

i can see a file in my remote folder CanalPlusCube.spr. how can i check the lay out, cause i m sure i saw the black and white remote in the beta remote website. steph

alanrichey · Post by **alanrichey** » Tue Sep 27, 2011 5:53 am

Sorry, my apologies, Sling have done a remote image. Earl is running with this one so I won't tread on his toes, but to save him a bit of time, the code is S1288.

Al

stepheire · Post by **stepheire** » Tue Sep 27, 2011 6:32 am

so how i incorporate the remote image with the bin files Earl gave me, those who are working fine.
sorry for all the disturbance just learning the geek mod

steph

alanrichey · Post by **alanrichey** » Tue Sep 27, 2011 9:32 am

Earl will do it for you. As I said, I don't want to butt in on his work, although if he hasn't done it in a couple of days I'll do it for you.

Post by **The Robman** » Tue Sep 27, 2011 10:15 am

I didn't read anywhere that Earl volunteered to do it, so I doubt that he would mind if you were to do it. Everything's a group effort here.

eferz · Post by **eferz** » Tue Sep 27, 2011 7:40 pm

alanrichey wrote:Sorry, my apologies, Sling have done a remote image. Earl is running with this one so I won't tread on his toes, but to save him a bit of time, the code is S1288.

Thanks Al, but can you take it over from here. I know that these realistic remotes tend not to have the same pairings than the generic SlingRemote. Since you and Brandon have a better understanding of implementing them, I think either of you are better candidates for its implementation. That's pretty much why I was trying to introduce Stepheire to the placeshiftingenthusiasts site.

However, if you can give me information about the .xap file or the manufacturer.device.code association then I'd like to update the Wikia for this specific realistic SlingRemote skin.

alanrichey · Post by **alanrichey** » Wed Sep 28, 2011 1:12 am

OK, for stephiere the BIN files at https://www.hifi-remote.com/forums/dload ... le_id=9945 are updated with a new set of instructions. Give them a try.

In simple terms all you do is replace the generic code that you used (S2013), with the code for the realistic remote (S1288 in this case), and then during the setup make sure you select the correct manufacturer rather than 'Other'. Then the Slingbox should download, and use, the correct 'skin'.

The problem comes when you map buttons. All the 'basic' buttons are normally correct, but when it comes to 'odd' buttons, like Audio, Teletext, myDVR, colours....., then that function could have been mapped to any key map depending on who built the remote skin. There seemed to be no consistency. For example, before Sling standardised on using Custom 22-26 for the Colour buttons I have seen them mapped to various combinations. What I then have to do is put the remote in debug mode, install it on my SLingbox and then hover the mouse over each button to determine what keymap it is using.

Luckily this remote is very simple, with only the basic buttons on, so we shouldn't have a problem. Cross fingers

stepheire · Post by **stepheire** » Wed Sep 28, 2011 11:11 am

WAOUUUU, IT WORKS AND LOOK GREAT . YOU WERE SO QUICK. I LIKED THE RED COLOR WHEN YOU GO OVER THE BUTTONS
THANK YOU ALL, FOR THE TIME YOU GAVE ME.
STEPH

alanrichey · Post by **alanrichey** » Thu Sep 29, 2011 1:48 am

Glad to help

Richard Le Beau · Post by **Richard Le Beau** » Wed Oct 10, 2012 5:50 am

Hello,
I am using custom remote codes on a slinbox solo with a + Le Cube STB ( Canal Satellite Recepteur HD WIFI) which i download from JP1 forum. It works fine but the custom remote sends, double repeating signal when going through channels. Please, can you set the repeat to 0

I got the files from this link:
https://www.hifi-remote.com/forums/dload ... le_id=9945

If any one can Help!!

Thanks and Regards
Richard

alanrichey · Post by **alanrichey** » Wed Oct 10, 2012 5:55 am

Rob: Sorry, I know I should learn how to do this but I do it so infreqently I keep forgetting how to do it. This is the CanalSat protocol, which is the repeat byte ?

HCS08=20 12 17 31 31 8F 80 10 08 07 00 7C 00 83 00 7C 00 83 AD BB 3A A9 4E 62 56 4E 63 62 CD FF 5F CD FF 92 24 08 10 A3 4E 56 61 CC FF 5F 81
Code.S3C80=2D 5E 31 8B 0F 8F 80 10 08 07 00 7D 00 6F 00 7D 00 6F AD A7 00 10 68 05 E4 06 05 F6 01 46 F6 01 0A FB 08 46 29 01 69 04 8D 01 46 AF

JP1 Remotes

canalplus hd wifi

Custom remote sends double, repeating IR signal