EEPROM part # from mouser?

Garret · Post by **Garret** » Mon Dec 22, 2003 1:24 pm

Does anyone have the Mouser part number for a 2k EEPROM for a 6131? I would just order from Rob, but Mouser is only about 5 minutes from my house and I just pick up via 'will call'.
thanks,
Garret

usblipitor · Post by **usblipitor** » Mon Dec 22, 2003 2:14 pm

as long as we are asking for part numbers, I wouldn't mind knowing the part number for the 6 pin header.

jamesgammel · Post by **jamesgammel** » Mon Dec 22, 2003 3:34 pm

Steve,

You probably won't find one for a 6 pin. All a 6 pin header is is three sections broke off a dual 20. One will thus make 6 6-pin headers and a leftover 4 pin "junk".

Jim

Mark Pierson · Post by **Mark Pierson** » Mon Dec 22, 2003 4:10 pm

The one that I've used in the past is made by Atmel and the Mouser P/N is 556-AT24C16N10SI2.7, but it appears to be out of stock.

Post by **The Robman** » Mon Dec 22, 2003 5:38 pm

This EEPROM should do the trick... 698-CAT24WC16JI-1.8

For the 6-pin, you should get this part: 517-836-01-36, it's a 72 pin strip of breakaway header, which means you can make 12 6-pin connectors out of it.

Garret · Post by **Garret** » Tue Dec 23, 2003 7:47 am

Thanks for the help.
Garret

mstokley · Post by **mstokley** » Sun Dec 28, 2003 2:07 pm

The Robman wrote:This EEPROM should do the trick... 698-CAT24WC16JI-1.8

For the 6-pin, you should get this part: 517-836-01-36, it's a 72 pin strip of breakaway header, which means you can make 12 6-pin connectors out of it.

Is the eeprom listed by Rob only for the 6131 or is ok for the 8011 & 6012 as well - Thanks

usblipitor · Post by **usblipitor** » Sun Dec 28, 2003 2:14 pm

It should be ok for those remotes as well. But why aren't you buying the eeprom from Rob? Cheaper, faster, better...

JP1 Remotes

EEPROM part # from mouser?

EEPROM part # from mouser?

Thank you!

EEPROM