JVC D-ILA Projection TV (e.g. HD-xxG786 or HD-xxZ575)

[mrshiney]

Ok I have this TV and using one of the JVC TV upgrade files posted in the file section I was able to get TV/VID and PWR on/off working as well as a few other basic functions. Does anyone have a full upgrade file for the D-ILA series of JVC TVs? In particular, what would be really-really awesome is the discrete input codes. My understanding is that the remote for the newer HD-xxG786 series does not have these buttons (but the remote for the HD-xxZ575 series does).

# Device: JVC HD-52G786 D-ILA TV (but seeking remote commands for HD-52Z575)
# Type of device: TV
# Year: '05-'06
# JP1 Remote model: URC-8910
# JP1 user? Yes
# Still have original remote? Yes, but not the HD-52Z575 remote that has the commands I need (discrete input selection)
# Checked the file section? Yes
# Checked the Pronto file section (at R/C)? Yes
# Learning remote question? (n/a or explanation) I can learn the commands from my remote, but not the HD-52Z575 remote that has the commands I need (discrete input selection)

[Capn Trips]

Partially working setup code? (no or setup code)
If you have found a setup code that controls some functions, even if it's only one or two butons, PLEASE STATE what the setup code is (eg, VCR/1234), and what part works or doesn't work.

You skipped one part of the template. If you tell us (or better yet link to) the partially working code, it's easier to know what you're starting from.

...and I think most readers of this thread will have figured out that you want the discrete input codes. I'm not sure writing it four times makes it particularly clearer.

[mrshiney]

Here's what I'm working with. By using learned commands and converting to device codes I was able to add in a bunch of stuff already. What I need are the discrete input selection codes from the HD-xxZxxx series TV remote.

Code: Select all

Upgrade code 0 = 00 35 (TV/0053) JVC TV (RM v1.40)
 34 06 7e fa 4d 3f 87 07 c7 67 e7 17 a1 37 5f c1
 21 25 a5 af df c3 4f 11
KeyMoves
 94 f3 00 35 e1«iLink Menu»¦
 a0 f3 00 35 af«D/A Button»¦
 2c f3 00 35 54«Theater Pro»¦
 2b f3 00 35 36«Aspect»
End

[gfb107]

Have you looked at http://www.hifi-remote.com/cgi-bin2/ueic.cgi?TV_0053

[mrshiney]

Thanks.

Here's the revised upgrade code. Discrete inputs assigned to L1-L4, plus some other goodness.

Code: Select all

Upgrade code 0 = 00 35 (TV/0053) JVC TV (RM v1.40)
 34 06 7e fa 4d 3f 87 07 c7 67 e7 17 a1 37 5f c1
 21 25 a5 af df c3 4f 11
KeyMoves
 94 f3 00 35 e1«iLink Menu»¦
 0b f3 00 35 73«Bright Down»¦
 0d f3 00 35 f3«Bright Up»¦
 0e f3 00 35 36«16-9»¦
 2c f3 00 35 54«Theater Pro»¦
 25 f3 00 35 77«Video 1»¦
 26 f3 00 35 b7«Video 2»¦
 27 f3 00 35 d7«Video 3»¦
 28 f3 00 35 27«Video 4»¦
 2b f3 00 35 36«Aspect»
End

[Capn Trips]

I recommend you upload your KM or RM file to the appropriate area of the file section. Just the copy/paste code is usually somewhat less than helpful to most users, and rather difficult to find buried in a thread.

[Ferrari328]

I have an JVC HD70FH96 and have used the codes from the link above (tv_0053) but I can't get the 155 Color Down and 151 Color Up to work.

I can get other codes to work on my URC8810.

Any hints?

Thanks

/Peter