View previous topic :: View next topic |
Author |
Message |
DaveM59
Joined: 06 Apr 2008 Posts: 34
|
Posted: Wed May 14, 2008 12:52 pm Post subject: update |
|
|
After 30 days, PayPal returned my money. Here's part of their e-mail:
Quote: | The funds have been returned to your account.
This payment was returned for the following reason(s):
This payment was funded with a credit card, and "Mr. X" [edited -- no point in putting the name of the person doing business as DIYGadget on this forum] has not yet upgraded to a Premier or Business account.
Please contact "Mr. X" (diy_gadget@yahoo.com) to arrange an alternate payment method |
So I'm lucky to get my money back without a dispute. Still no response to my e-mails. I went ahead and built my own JP1 cable, and I would advise anyone waiting for DIYGadget to do the same, or buy one from another supplier. |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Sat May 24, 2008 5:23 am Post subject: |
|
|
Hi,
We are not out of business!
We were having problems with yahoo mails. Fortunately, we have developed a dedicated ticket system to replace direct email support, for any supports, you can submit a ticket at http://www.csbooth.com or send email to diygadget at csbooth dot com, a ticket will be automatically created for you. As for the orders, all JP1 USB cables will be sent out next week, we had problems with our order system, therefore there is a delay here. As compensation. we will ship an USB card reader along with the delayed order for free.
Sorry about that and thanks for your business!
diygadget.com _________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
Spathi
Joined: 05 Apr 2008 Posts: 2
|
Posted: Thu Jun 19, 2008 12:38 am Post subject: |
|
|
Do you still make JP1.2 cables? |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Fri Aug 29, 2008 9:52 pm Post subject: |
|
|
Yes, we are. we will stock Jp1.2 in 1-2 weeks.
Thanks
Spathi wrote: | Do you still make JP1.2 cables? |
_________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Fri Sep 05, 2008 11:09 pm Post subject: |
|
|
The new version of JP1.2/1.3 Serial cables are in stock now. This new version uses 74HC266 inside DB9 shell.
We also stocked USB to Serial Adapter. We have tested it, it works with our JP1.2/1.3 Serial cable.
Get a free USB SD/MMC card reader/writer with purchase of a JP1.2/1.3 cable with a USB to Serial Adapter. Offer ends Sept 30/2008. _________________ Get the coolest diy gadgets from http://www.diygadget.com today!
Last edited by prelude on Mon Sep 08, 2008 7:39 pm; edited 1 time in total |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Sat Sep 06, 2008 9:47 am Post subject: |
|
|
prelude wrote: | The new version of JP1.2/1.3 Serial cables are in stock now. This new version uses 74HC266 inside DB9 shell.
We also stocked USB to Serial Adapter. We have tested it, it works with our JP1.2/1.3 Serial cable.
Get a free USB SD/MMC card reader/writer with purchase of a JP1.2/1.3 cable with a USB to Serial Adapter. Offer ends Aug 31/2008. | Uhhh... what good is the offer if you advertise it AFTER it expires?! _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Mon Sep 08, 2008 7:38 pm Post subject: |
|
|
yaaah... time goes so fast.. I forgot now it's Sept!
I have just updated so offer ends Sept 30, not Aug 31
Thanks
Capn Trips wrote: | prelude wrote: | The new version of JP1.2/1.3 Serial cables are in stock now. This new version uses 74HC266 inside DB9 shell.
We also stocked USB to Serial Adapter. We have tested it, it works with our JP1.2/1.3 Serial cable.
Get a free USB SD/MMC card reader/writer with purchase of a JP1.2/1.3 cable with a USB to Serial Adapter. Offer ends Aug 31/2008. | Uhhh... what good is the offer if you advertise it AFTER it expires?! |
_________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Sun Aug 16, 2009 8:43 am Post subject: |
|
|
We are now offering USB version of JP1.2/1.3 cable. Our USB version has a low profile header, it fits small openings (such as URC-7555, RS 15-134 and RS 15-135 etc, please check the back of your remote) so no extra adapter is needed.
Please check it out on www.diygadget.com
Thanks! _________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
SouthPaw
Joined: 01 Mar 2005 Posts: 11
|
Posted: Thu Mar 18, 2010 7:40 am Post subject: |
|
|
Does your JP1.2/1.3 USB cable and drivers work with 64-bit Win7?
Thanks. |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Wed Oct 20, 2010 4:02 pm Post subject: |
|
|
SouthPaw wrote: | Does your JP1.2/1.3 USB cable and drivers work with 64-bit Win7?
Thanks. |
Yes it does _________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Wed Dec 08, 2010 9:04 pm Post subject: JP1.2/1.3 USB cable to JP1 adapter is in stock |
|
|
We are offering JP1.2/1.3 USB cable to JP1 adapter now, price is $17.99, as always, shipping is FREE to USA and CANADA
_________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Dec 17, 2010 2:45 pm Post subject: |
|
|
prelude, I've just resurected my old JP1.x cable that I bought from Rob. I think that we determined it was one of yours. When it failed last year I wasn't sure if it was the USB Adapter or the cable. I shortened my cable past a suspicious spot where the ribbon had a deep crease, but that didn't help.
I haven't had very good luck with other cables. So I went out and purchased a new USB adaptor yesterday(retail $39 ) but it got me up and running. !!!!!!!!!!!!!!!!!
It turned out that the problem was in the USB adapter. I'm now running my cable that has 20,000+ upload/downloads on it, works well with JP1.1 JP1.2 and JP1.3, but I'm wondering if there is an adapter of some kind, or a new end for the cable that I could add WITHOUT SOLDERING that might allow me to work with those RCA remotes as well?
I can always cut out the case on my own remotes, but I've been recommending these remotes to other people and I wouldn't want to go around dremmeling their cases....... _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4502
|
Posted: Fri Dec 17, 2010 3:07 pm Post subject: |
|
|
Both DIY and Tommy sell the adapters you're talking about.
|
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Fri Dec 17, 2010 4:13 pm Post subject: |
|
|
Oh that's the 9.99 socket adapter. With all the talk about opening the relief and super gluing the case I didn't realize there was a fix for this. Cool! _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
risk1994
Joined: 26 Jan 2012 Posts: 1
|
Posted: Mon Feb 06, 2012 11:02 pm Post subject: |
|
|
I JUST received the 'JP1.2/1.3 (FLASH) USB Cable for Universal Remotesfrom diygadget.
This cable broke immediately. There is no strain relief between the cable and the jack that connects to the remote. I tried to remove the cable from the remote (used hardly any force) and the wires stripped out of the jack. I have no idea how to fix since I dont know which wires go to which hole.
Can you replace the cable or at least tell me which wires go where so I can repair this item I just bought myself. |
|
Back to top |
|
|
|