View previous topic :: View next topic |
Author |
Message |
dinki
Joined: 23 Feb 2006 Posts: 3
|
Posted: Thu Feb 23, 2006 11:13 am Post subject: Looking for a code to activate most/all keys of Cinema7 |
|
|
Hi. Taking the advice that there are no stupid questions, I decided to post my stupid question:
Can someone tell me of a code that has most, if not all, of the keys for my Cinema7 remote activated? I am trying to find one with as many buttons active as possible to use in conjunction with my Mythtv system which is controlled by lirc. I have had success, but seem to be choosing blind when searching for a code that gives me the maximum number of buttons to use with my Mythtv system.
Also, if anyone has a lircd.conf and .lircrc file to go with the mystery code, that would be greatly appreciated too!
Many thanks... |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Thu Feb 23, 2006 12:00 pm Post subject: |
|
|
IIRC, CABLE mode has the most buttons, so your best bet would be to create an upgrade using CABLE mode that has all of the available buttons defined. You can use keymoves to program the remaining buttons if you like.
You can use any protocol/device code combo that you like, just as long as you don't accidentally pick a combo that matches one of your existing devices. I would suggest using the NEC2 protocol with a device code of 123 and a sub-device code of 210 (these are just random numbers). _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Thu Feb 23, 2006 12:04 pm Post subject: |
|
|
I was indeed making that assumption for exactly those reasons. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
dinki
Joined: 23 Feb 2006 Posts: 3
|
Posted: Thu Feb 23, 2006 12:28 pm Post subject: |
|
|
Thank you for your input. I've used the remote (after soldering in the header) with my JP1 cable. I was really looking for a device code that had a lot of the buttons already active and then I could tweak the remaining buttons that were not being used. I'm not sure if I'm asking the question correctly though. The truth is that I'm pretty lazy and am looking for an easy solution if one exists.
Thanks for your time... |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Thu Feb 23, 2006 12:44 pm Post subject: |
|
|
You have 2 options:
1. Build a new upgrade as I described earlier, which should take you no more than 5 minutes or so.
or
2. Keep trying CBL codes until you find one that has enough buttons defined to meet your needs.
I'm guessing that option 2 will take longer than option 1. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Thu Feb 23, 2006 12:50 pm Post subject: |
|
|
In fact, just to show you how quick option 1 is, I did it for you...
The following upgrade has all of the buttons available in CBL mode programmed:
Upgrade Code 0 = 07 D0 (Cable/2000) MythTV (KM v8.37)
5A 05 7E FE FE FD 21 21 B4 AF 2F CF 4F 8F 07 47
FB 87 7B BB 0F 67 27 C7 A7 F7 3B E7 B7 37 9B 1B
EB 77 D7 57 97 17
End
Alternatively, the following upgrade not only has all of the CBL buttons defined, it will also program the remaining buttons using keymoves:
Upgrade Code 0 = 07 D0 (Cable/2000)
5A 05 7E FE FE FD 21 21 B4 AF 2F CF 4F 8F 07 47
FB 87 7B BB 0F 67 27 C7 A7 F7 3B E7 B7 37 9B 1B
EB 77 D7 57 97 17
KeyMoves
26 F3 07 D0 DB 27 F3 07 D0 5B 2F F3 07 D0 6B 30
F3 07 D0 AB 35 F3 07 D0 2B 36 F3 07 D0 CB
End _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
dinki
Joined: 23 Feb 2006 Posts: 3
|
Posted: Thu Feb 23, 2006 1:54 pm Post subject: |
|
|
Wow! Perfect. Thanks so much! |
|
Back to top |
|
|
indulis
Joined: 27 Oct 2003 Posts: 14
|
Posted: Tue Jun 27, 2006 2:43 am Post subject: Another device definition |
|
|
I tried Rob's device upgrade but had a lot of problems learning the IR signals produced on my Linux box (via serial IR interface).
So, here is my own (working) version. As the Linux mythtv system will learn the output from the remote, you can pretty much assign any EFC/OBC numbers you like, so I did it sequentially (EFC sequential). The remote I've set up and which is working now is a URC-8811.
Anyway, here is the upgrade, I'll also append in the lircd.conf file I created, and also the ~/.mythtv/lircrc file (note there is no dot at the start of lircrc!)- the lircrc file is used by mythtv 0.19 for native LIRC support (no need for irxevent).
Upgrade for One-for-all remote URC-8811 (and similar)
Code: |
Upgrade Code 0 = 15 A4 (VCR/1444) URC-8810 Indulis' mythtv VCR 1444 (KM v9.01)
5A 00 FE FE FE E1 00 F6 F6 46 66 06 26 C1 E1 81
A1 41 61 01 21 C0 E0 80 A0 E3 20 42 60 83 40 82
E2 02 A2 A3 43 62 C3 00 63 23 03 22 CD
KeyMoves
22 F3 15 A4 C2«sleep» ¦3B F3 15 A4 8D«pip on/o
ff»¦20 F3 15 A4 AD«pip swap» ¦3C F3 15 A4 4D«pi
p move»
End
|
Upgrade for One-for-all remote URC-7560 (and similar)
Code: |
Upgrade Code 0 = 25 A4 (VCR/1444) URC-7560 Indulis' mythtv VCR 1444 (KM v9.01)
5A 00 F6 FE FE 81 00 F6 F6 46 66 06 26 C1 E1 81
A1 41 61 01 21 C0 E0 80 A0 03 40 20 C3 E3 83 A3
43 E2 62 A2 42 02 82 CD 63 C2
End
|
/etc/lircd.conf file to match above device upgrades
Code: |
begin remote
name urc_8811_mythtv
bits 16
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
header 9045 4427
one 603 1641
zero 603 518
ptrail 606
repeat 9050 2196
pre_data_bits 16
pre_data 0x9F6
gap 108317
toggle_bit 0
begin codes
EXIT 0xDF20
CH+ 0x1FE0
CH- 0x7F80
VOL+ 0xFE01
VOL- 0xDE21
REW 0x5DA2
PLAY 0x1DE2
FWD 0xBD42
STOP 0x9D62
REC 0xFD02
PAUSE 0x7D82
F-REW 0x32CD
F-FWD 0xDD22
1 0x9966
2 0xF906
3 0xD926
4 0x3EC1
5 0x1EE1
6 0x7E81
7 0x5EA1
8 0xBE41
9 0x9E61
0 0xB946
ENTER 0x9C63
TV-VID 0xFC03
MUTE 0x3FC0
FAV 0x1FE0
PREV 0xDC23
MENU 0xBF40
GUIDE 0x9F60
INFO 0xFF00
UP-ARROW 0x3CC3
DOWN-ARROW 0x1CE3
LEFT-ARROW 0x7C83
RIGHT-ARROW 0x5CA3
SELECT 0xBC43
POWER 0x5FA0
PIP 0x728D
MOVE 0xB24D
SWAP 0x52AD
SLEEP 0x3DC2
end codes
end remote
|
~/.mythtv/lircrc file to match above lircd.conf file
Code: |
# swap tuners using Y command
begin
prog = mythtv
button = PREV
config = Y
end
# get into program guide using neat multiple command sequence!
begin
prog = mythtv
button = GUIDE
config = M,Return
end
begin
prog = mythtv
button = PLAY
config = P
end
begin
prog = mythtv
button = PAUSE
config = P
end
begin
prog = mythtv
button = EXIT
config = Esc
end
begin
prog = mythtv
button = Menu
config = M
end
begin
prog = mythtv
button = CH+
delay = 3
repeat = 4
config = Up
end
begin
prog = mythtv
button = CH-
delay = 3
repeat = 4
config = Down
end
#### cursor pad ####
begin
prog = mythtv
button = UP-ARROW
delay = 3
repeat = 3
config = Up
end
begin
prog = mythtv
button = RIGHT-ARROW
delay = 3
repeat = 3
config = Right
end
begin
prog = mythtv
button = DOWN-ARROW
delay = 3
repeat = 3
config = Down
end
begin
prog = mythtv
button = LEFT-ARROW
delay = 3
repeat = 3
config = Left
end
begin
prog = mythtv
button = SELECT
config = Return
end
begin
prog = mythtv
button = INFO
config = I
end
begin
prog = mythtv
button = VOL+
delay = 3
repeat = 2
config = F11
end
begin
prog = mythtv
button = VOL-
delay = 3
repeat = 2
config = F10
end
begin
prog = mythtv
button = MUTE
config = F9
end
begin
prog = mythtv
button = REW
config = <
end
begin
prog = mythtv
button = FWD
config = >
end
begin
prog = mythtv
button = F-REW
config = PgUp
end
begin
prog = mythtv
button = F-FWD
config = PgDown
end
# Next button is to change screen aspect ratios
begin
prog = mythtv
button = TV-VID
config = W
end
# Next button is to Set favourites
begin
prog = mythtv
button = FAV
config = /
end
# Next button is to Record
begin
prog = mythtv
button = REC
config = R
end
# Next button is to change channel to currently selected within EPG
begin
prog = mythtv
button = ENTER
config = X
end
# Next button is for page up
begin
prog = mythtv
button = ENTER
config = X
end
begin
prog = mythtv
button = 0
config = 0
end
begin
prog = mythtv
button = 1
config = 0
end
begin
prog = mythtv
button = 2
config = 0
end
begin
prog = mythtv
button = 3
config = 3
end
begin
prog = mythtv
button = 4
config = 4
end
begin
prog = mythtv
button = 5
config = 5
end
begin
prog = mythtv
button = 6
config = 6
end
begin
prog = mythtv
button = 7
config = 7
end
begin
prog = mythtv
button = 8
config = 8
end
begin
prog = mythtv
button = 9
config = 9
end
|
Cheers,
Indulis
Last edited by indulis on Wed Jun 28, 2006 12:18 am; edited 2 times in total |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Tue Jun 27, 2006 5:18 am Post subject: |
|
|
I'm not sure there is a question in there. What are you trying to do? What are you asking help with? _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
indulis
Joined: 27 Oct 2003 Posts: 14
|
Posted: Tue Jun 27, 2006 8:50 pm Post subject: Just adding to the lore... |
|
|
No question here from me, I spent some time figuring out how to get my JP1 remotes talking to mythtv, so though I should document it for when someone searches for an answer.
Do you think it should go in a different section? Happy to rewrite it and put it elsewhere!
Actually, if someone could create a files section in the Device section PVR-Mythtv I'll put it the files in there, and once that is done, clean up my post above.
Indulis |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Tue Jun 27, 2006 9:36 pm Post subject: |
|
|
Why not just zip together all the component files and save it as "MythTV" in the PVR folder? Just a suggestion. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
indulis
Joined: 27 Oct 2003 Posts: 14
|
Posted: Wed Jun 28, 2006 12:10 am Post subject: I'm happy to ZIP em up! |
|
|
...It was just that I noticed that there were sections for Tivo and other PVRs, and thought I'd follow suit. So I'll zip the files up into the PVR section instead.
Nice to be doing something with the JP1 remotes again... its a testimony to how good the product and the tools are that I haven't had to do anything to the remote for 12 months+
Cheers,
Indulis |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21238 Location: Chicago, IL |
Posted: Wed Jun 28, 2006 7:36 am Post subject: Re: I'm happy to ZIP em up! |
|
|
indulis wrote: | ...It was just that I noticed that there were sections for Tivo and other PVRs, and thought I'd follow suit. |
I made seperate sections for those two just because there were so many files for them. The problem was particularly acute for Tivo where not only were there so many files, but there are many different brands of Tivo, so the files weren't even all together alphabetically. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|