Celrun TD9000

k-park · Post by **k-park** » Sun Sep 14, 2008 8:56 am

http://www.hifi-remote.com/forums/dload ... le_id=5761

I captured some remote signals from Celrun(DVR)
but it is shown as

Gap-558-1674-32?
Gap-556-1674-32?
and one NEC1

IR.exe cannot find proper Protocol

Using IR.EXE 7.14 and URC-8910.

which protocol should I select from RemoteMaster

please help

Post by **The Robman** » Sun Sep 14, 2008 10:11 am

This signal is basically the NEC1 signal except that nibbles in the checksum byte have been swapped.

Try this upgrade...
http://www.hifi-remote.com/forums/dload ... le_id=5762

It looks like there are still many more buttons that you didn't learn, if you'd like to include them in the upgrade, you should learn them and then to get the OBC code, you should look at the MISC column in IR.exe, there you'll find the OBC in hex form as the 3rd byte of data.

For example, if you look at the learn of the "1" button, the misc data is "CE.13.A.5F", the only data that you need to worry about is the 3rd item (ie, "A"), this is the OBC of the button in hex form.

If you're unfamiliar with hex, you can use your Windows calculator to convert it to decimal.

Once you've created a complete upgrade that includes all of the buttons on the remote, even ones that you don't think you'll ever use, please load it to the file section and post a link it it here.

Btw, for anyone that's interested, here's a pic of the box and the remote.

k-park · Post by **k-park** » Mon Sep 15, 2008 8:14 am

Thank you Rob

I downloaded upgrade file, and import it from RemoteMaster
and export binary file for Sling EUI PL chip

but not yet success in controlling CelunBox remotely

Could you think any other point in upgrade operation?

Thank you for reading

Mark Pierson · Post by **Mark Pierson** » Mon Sep 15, 2008 8:37 am

k-park wrote:I downloaded upgrade file, and import it from RemoteMaster
and export binary file for Sling EUI PL chip

but not yet success in controlling CelunBox remotely

When you opened the upgrade in RM did you change the selected remote to the Slingbox? Did you also copy the protocol upgrade to IR before creating the bin file?

Capn Trips · Post by **Capn Trips** » Mon Sep 15, 2008 8:53 am

Mark Pierson wrote:
k-park wrote:I downloaded upgrade file, and import it from RemoteMaster
and export binary file for Sling EUI PL chip

but not yet success in controlling CelunBox remotely
When you opened the upgrade in RM did you change the selected remote to the Slingbox? Did you also copy the protocol upgrade to IR before creating the bin file?

Mark, IR doesn't enter into it. The bin file is created in RM. So if there is a protocol upgrade required, it is automatically incorporated into the bin file. Also, RM doesn't allow creating a bin unless the selected remote is Slingbox. The concept of a bin file is meaningless for all of the other remotes. That said, he still has to select the CORRECT Slingbox rdf and other errors in RM are certainly possible.

k-park · Post by **k-park** » Mon Sep 15, 2008 10:15 am

Sorry, explanation was not enough

I opened upgrade file in RM and asked to select remote name
so I selected "SlingBox with PL chip"

and RM has latest rdf files (ver 1.28)

Could anyone upload Slingbox(PL) binary file?
http://www.hifi-remote.com/forums/dload ... &cat_id=87

Mark Pierson · Post by **Mark Pierson** » Mon Sep 15, 2008 11:03 am

Capn Trips wrote:Mark, IR doesn't enter into it. The bin file is created in RM. So if there is a protocol upgrade required, it is automatically incorporated into the bin file.

It's been so long since I did anything with a Slingbox that I plum forgot... I'll go sit in the corner for the rest of the day.

Capn Trips · Post by **Capn Trips** » Mon Sep 15, 2008 11:54 am

I've uploaded bin files for all 4 Slingbox chips. They are in the folder you loned above.

EDIT: I removed the files since they were based on a faulty Protocol upgrade.

Post by **The Robman** » Mon Sep 15, 2008 8:16 pm

It was my fault, I forgot to check "use assembled protocol code" in PB before I copied the protocol code over. I've tested the code this time and it looks good.

I have just updated the KM file.

k-park · Post by **k-park** » Tue Sep 16, 2008 6:48 am

The Robman wrote:It was my fault, I forgot to check "use assembled protocol code" in PB before I copied the protocol code over. I've tested the code this time and it looks good.

I have just updated the KM file.

Thank you rob.

Finally it works!

I`ve uploaded final capture result which contains other buttons to file section

http://www.hifi-remote.com/forums/dload ... le_id=5761

please update upgrade file > rob