RemoteMaster v1.85 is now available!

Discussion forum for JP1 software tools currently in use, or being developed, such as IR, KM, RemoteMaster, and other misc apps/tools.

Moderator: Moderators

gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:

RemoteMaster v1.85 is now available!

Post by gfb107 »

I've built and released RemoteMaster v1.85

Available downloads are: Changes for v1.85
  • Improve importing of raw NEC upgrades
  • RMIR: General improvements to parsing remote images
  • Fix uploading through USB JP1 interface
Links:
The RemoteMaster project home page, now accepting donations.
RemoteMaster.v1.85.zip
RemoteMaster.v1.85_Setup.exe - See note below.
Change Log (also included in the ZIP file)
Readme.html (also included in the ZIP file)

Note: Even with the stand-alone Windows version, you must follow steps 4 and 5 of the installation instructions.
Last edited by gfb107 on Fri May 16, 2008 1:16 pm, edited 3 times in total.
kokalarobia
Posts: 32
Joined: Fri Apr 25, 2008 2:08 pm

Many many thanks

Post by kokalarobia »

Hello, Gfb107,
Many thanks to you for this new release of RM.
I began to think this topic were abandonned.
Koka :)
gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:

Post by gfb107 »

Why would you think it's been abandoned? This is the 4th release I've made this year.
skids

Post by skids »

The file s don't seem to be available for download. Also when I try and download the Maps and Images file it gets to about 7% and stops.
gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:

Post by gfb107 »

There is something wrong with the files. I'll work on it. Stay tuned.
kokalarobia
Posts: 32
Joined: Fri Apr 25, 2008 2:08 pm

IR device codes are difficult to find

Post by kokalarobia »

Beside Logitech USB RCs, and other proprietary cable RCs.
Then the rareness of recently devices IR codes, I had these thoughts.
But now I think I will stay with OFA and JP1. :)
gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:

Post by gfb107 »

**** EDIT ****
The sourceforge problem has been resolved. No need to go to 4shared.com any more.

I've put in a support request a sourceforge to get the file problem resolved. Until then, you should be able to get them here.
Last edited by gfb107 on Mon Apr 28, 2008 5:20 pm, edited 1 time in total.
Capn Trips
Expert
Posts: 3989
Joined: Fri Oct 03, 2003 6:56 am

Post by Capn Trips »

Sorry, Greg, but till no joy. I can't access the 4shared website to which your link points (Page Cannot be Found).

Is there a reason you cannot upload the files to the file section here?

(If it's something obvious, like file size, I apologize for not being smart enough to intuit that.)
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:

Post by gfb107 »

Yes, it is a file size issue.

It is quite likely that many corporate firewalls will block access to the 4shared website.
ElizabethD
Advanced Member
Posts: 2348
Joined: Mon Feb 09, 2004 12:07 pm

Post by ElizabethD »

Yes they will block.
From home it just worked - I had to tell Opera to permit that site and allow javascript to run. Then it just was a two-step process. Select a file to download, it went to another window, I waited till Kaspersky AV did its thing (long time), and had to click a tiny Download link just below the KAV report. Thanks Greg!
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride :)
kokalarobia
Posts: 32
Joined: Fri Apr 25, 2008 2:08 pm

RM vs KM

Post by kokalarobia »

Hello,
i am just a beginner. Why do you prefer KM rather than RM ?
I wonder it because I think RM is easier to use than KM. I had my first succes with RM, may be if I do a come back to KM, I will be good at last.
Capn Trips
Expert
Posts: 3989
Joined: Fri Oct 03, 2003 6:56 am

Re: RM vs KM

Post by Capn Trips »

kokalarobia wrote:Hello,
i am just a beginner. Why do you prefer KM rather than RM ?
I wonder it because I think RM is easier to use than KM. I had my first succes with RM, may be if I do a come back to KM, I will be good at last.
To whom is this question directed? Nobody in this thread has suggested that KM is preferred to RM. If you want to have a general discussion about RM vs. KM, then perhaps a new thread would be approrpiate for you to start.
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
ElizabethD
Advanced Member
Posts: 2348
Joined: Mon Feb 09, 2004 12:07 pm

Post by ElizabethD »

Greg, jp1 USB: I see a change in that the port selection is included in the usb text (3) for me. But it still not getting the data from the remote. Is there a log other than the .err file that I could look at?
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride :)
whompus
Posts: 540
Joined: Wed Apr 27, 2005 1:43 am

Post by whompus »

gfb107
Expert
Posts: 3411
Joined: Sun Aug 03, 2003 7:18 pm
Location: Cary, NC
Contact:

Post by gfb107 »

The folks at sourceforge have fixed the problem.
Post Reply