RCA RT2380 Receiver and URC6131

HoosierBubba · Post by **HoosierBubba** » Fri Mar 04, 2005 5:04 pm

I can't get my URC 6131 to turn power my receiver on or off, also I cannot get it to switch the sources on my receiver to DVD or SAT. Does anyone know of any advanced codes or anything to help with this? I have tried to contact OneForAll but never get a live person, just an answering machine.

Mark Pierson · Post by **Mark Pierson** » Fri Mar 04, 2005 5:46 pm

What setup code are you using to control the receiver? You might find the necessary advanced codes here.

MaskedMan · Post by **MaskedMan** » Fri Mar 04, 2005 7:14 pm

I can't help with ON & OFF commands,but for the inputs see this thread:

https://www.hifi-remote.com/forums/viewtopic.php?p=10226

HoosierBubba · Post by **HoosierBubba** » Fri Mar 04, 2005 10:00 pm

Well that solved my input problem, but still can't turn the receiver on or off. I am using the code 1254 for the receiver. I can do everything but power it.

MaskedMan · Post by **MaskedMan** » Sat Mar 05, 2005 1:16 am

As for the power, I have been over this many times before, never could help get it,

http://www.remotecentral.com/cgi-bin/mb ... d.cgi?2658

HoosierBubba · Post by **HoosierBubba** » Sat Mar 05, 2005 8:36 am

I now have the remote doing everything it needs to do! I have to use seperate buttons for powering on and off, but that's ok, at least it works. I had to assign one key using the 219 code to power off, and the 099 code on another key to make it work

Post by **The Robman** » Sat Mar 05, 2005 9:14 am

In the JP1 world there is a special piece of software called "ToadTog" which can be used to simulate a power toggle button when the only codes available are discrete on and off codes.

gfb107 · Post by **gfb107** » Sat Mar 05, 2005 9:55 am

I don't think the OP is a JP1 user.

HoosierBubba · Post by **HoosierBubba** » Sat Mar 05, 2005 9:56 am

Thanks,
I will be looking more into the JP1 procedures, I have read some about them, and I need to get a cable before I can go further. For the time being, this works though!

Post by **The Robman** » Sat Mar 05, 2005 12:33 pm

gfb107 wrote:I don't think the OP is a JP1 user.

Yeah, I know that. I was making the info about ToadTog available, to show that there is a solution for his current problem in the JP1 world.

JP1 Remotes

RCA RT2380 Receiver and URC6131

RCA RT2380 Receiver and URC6131

Got the inputs working now

Thanks!!

Good to know