View previous topic :: View next topic |
Author |
Message |
bellebeest
Joined: 14 May 2010 Posts: 2
|
Posted: Tue Feb 21, 2012 5:29 pm Post subject: Benjamin bj800 sat receiver |
|
|
Hi Guys,
looking for file for this receiver: Benjamin bj800
Don't have original remote.
I do have a rcrp05b (jp1) remote but can't find rm file.
thanks for any help.
1. Device: benjamin bj800
2. Type of device: sat receiver
3. Year: 2011
4. JP1/UEI Remote model: rcrp05b
5. Do you have a JP1 cable? yes
6. Still have original remote? no
7. Checked the file section? yes
8. Checked Pronto file section (at R/C)? yes
9. Partially working setup code? no
10. Learning remote question? no
11. Have you tried the JP1 Lookup Tool? yes
Last edited by bellebeest on Tue Feb 21, 2012 7:38 pm; edited 1 time in total |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21254 Location: Chicago, IL |
Posted: Tue Feb 21, 2012 6:17 pm Post subject: |
|
|
My guesses as to the answers from the mandatory template:
1. Device: Benjamin bj800
2. Type of device: sat receiver
3. Year: no answer
4. JP1/UEI Remote model: RCA rcrp05b
5. Do you have a JP1 cable? no answer
6. Still have original remote? no
7. Checked the file section? no answer
8. Checked Pronto file section (at R/C)? no answer
9. Partially working setup code? no answer
10. Learning remote question? n/a
11. Have you tried the JP1 Lookup Tool? no answer _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
eferz Expert
Joined: 03 Jun 2010 Posts: 1078 Location: Austin, Texas |
Posted: Tue Feb 21, 2012 7:09 pm Post subject: |
|
|
The Robman wrote: | 1. Device: Benjamin bj800
4. JP1/UEI Remote model: RCA rcrp05b |
I couldn't find an exact match but was treated to Benjamin BEC-6000 as a consolation result. I recorded the IR signals with the JP1 tools to create the respective files.
You would think the sticky post for the Mandatory Template requirement would be easier to find since there's not many threads in this sub-forum. Especially since it is contained in the thread titled as, "READ BEFORE POSTING or your post will be DELETED!" _________________ Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.) |
|
Back to top |
|
|
bellebeest
Joined: 14 May 2010 Posts: 2
|
Posted: Thu Feb 23, 2012 7:35 am Post subject: |
|
|
@eferz thank you.
codes bec-6000 don't work for bj800.
@The Robman, sorry for template thing, should have read first. |
|
Back to top |
|
|
eferz Expert
Joined: 03 Jun 2010 Posts: 1078 Location: Austin, Texas |
Posted: Thu Feb 23, 2012 2:44 pm Post subject: |
|
|
bellebeest wrote: | @eferz thank you.
codes bec-6000 don't work for bj800.
@The Robman, sorry for template thing, should have read first. |
You're welcome. I'm sorry it didn't work out for you.
Unfortunately, an available match for your device/remote cannot be found. If you have or can get a hold of a compatible JP1 learning remote with the appropriate Flash cable (and an adapter if necessary) then you can use either IR or RMIR to upload a copy of your remote's image with its learned signals. Otherwise, you can pick up IR Scope and an IR Widget to record the commands to your computer. Uploading your file(s) into our diagnostic section from either method will offer us the resource to create customized upgrades which will allow control of that particular device. _________________ Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.) |
|
Back to top |
|
|
|