Remote Control file for Swisscom Bluewin-TV

swiss · Post by **swiss** » Mon Jan 19, 2009 2:03 am

Hi guys,

I'm looking for customed file to make work my remote control through slingplayer. I read in the support section of slingmedia that I need to create a new .bin file : http://support.slingmedia.com/get/KB-005646.html . But, I can't do this... ;(

Has someone already done it?

swiss · Post by **swiss** » Fri Jan 23, 2009 1:45 am

No answer...

I'm sure I'm not tho only one using Bluewin-TV and Slingbox.

I read this thread but I don't have any required equipment (JP1 cable, URC-8910) :
http://www.slingcommunity.com/article/1 ... er-Remote/
and be honnest, the setup seems too complicated for me...
Could someone can help me, if I give all information about my stb and slingbox, or send by mail my remote...

Post by **The Robman** » Fri Jan 23, 2009 7:29 am

I've never heard of the Bluewin brand, so it's not that common. The only way we could help you is if you were able to get us the remote control information from Bluewin or we were to borrow your remote.

swiss · Post by **swiss** » Tue Jan 27, 2009 1:52 am

Swisscom Bluewin-TV is the swiss IPTV provider. It uses the microsoft platform MediaRoom. I bought a slingbox Pro from France, so it's an european model. The STB is a Linksys KMM 3010-SC-A box.

I haven't any precise information about the remote control...

Gator · Post by **Gator** » Tue Jan 27, 2009 10:20 am

There is a KM-file for Bluewin here
https://www.hifi-remote.com/forums/dload ... le_id=4454

And a bin-file here
https://www.hifi-remote.com/forums/dload ... le_id=4453

Geir

swiss · Post by **swiss** » Fri Jan 30, 2009 4:24 pm

Thank you Gator for the link, but it doesn't work...

I've tried with the file C2000_PL.bin. I put it the SBAV folder and I wrote C2000 in the alternative code box. But I can't control my slingbox at all. No one button work. I can watch my TV, but I can't control it...

PS : I just see that I have a IR Balster version 4. So I think I need a RV.bin file...

Post by **The Robman** » Fri Jan 30, 2009 6:25 pm

Try this file then...
https://www.hifi-remote.com/forums/dload ... le_id=6187

Just FYI, here's the thread where the Bluewin was originally discussed:
https://www.hifi-remote.com/forums/viewtopic.php?t=8157

swiss · Post by **swiss** » Sat Jan 31, 2009 4:47 am

Thanks a lot for your help.

I read all the topic you pointed. But, no one of C2000_PL.bin or C2000_RV.bin file work

I can't control anything. My slingbox is new, but it's possible that the IR Blaster is dead... How can I check if it works?

Post by **The Robman** » Sat Jan 31, 2009 9:01 am

Do you have a digital camera or camcorder? If so, look at the IR blaster through the viewfinder and if it's sending a signal you should be able to see it.

swiss · Post by **swiss** » Mon Feb 09, 2009 1:59 am

Thank you so much! It works now!!!

In fact, my IR Blasters were dead (even if they're new...). I changed them, and all is fine now!

It's so great when it works!!!