DVICO TVIX HD M-5100SH

friday · Post by **friday** » Thu Oct 30, 2008 11:03 am

yes my jp1.x cable arrived today. i bought it last friday from diygadget.

friday · Post by **friday** » Thu Oct 30, 2008 12:51 pm

when i open RM and then open your upgrade file and choose my dreambox v4 remote i get 4 error messages like this

[/img]

friday · Post by **friday** » Sat Nov 01, 2008 11:06 am

nobody? i don´t know what to do now.

Post by **The Robman** » Sat Nov 01, 2008 3:50 pm

I have updated the KM file so that you will be able to switch to the Dreambox remote in RM, but I have no idea whether the resulting upgrade will work or not as I've never written an HCS08 protocol before.

If one of the HCS08 experts is reading this, can you check over my PB file please...
https://www.hifi-remote.com/forums/dload ... le_id=5910

mr_d_p_gumby · Post by **mr_d_p_gumby** » Sat Nov 01, 2008 6:19 pm

Rob, your PB file did not contain an HCS08 version of this protocol. However, I grabbed the copy out of the KM file, and it looks like you got it almost correct, but somehow some bytes at the end got scrambled around. Anyway, I've updated your PB file with a corrected HCS08 version.

Change the one in the KM notes area to:

Code: Select all

Upgrade protocol 0 = 01 FF (HCS08) TVIX 5000 (PB v4.01)
 20 15 23 47 11 CD 4D 08 08 01 21 03 45 01 21 01 
 1A D4 FD 11 A7 08 CB 3F 62 3F 63 6E 03 AA CC FF 
 5F
End

Obviously, I don't know if this works or not, but it should do the same as the S3C8 version.

Post by **The Robman** » Sat Nov 01, 2008 8:50 pm

Thanks Mike, I have updated the KM file.

There appears to be a bug in the way PB generates HCS08 code. If you click "Load Generated Code" using this PB file, you'll get the following code:

Code: Select all

0100  20 12             BRA        L0114
...
0113  11                DB         $11        ;pd0C: 
0114  A7 08     L0114:  AIS        #$08        
0116  CB CC FF          ADD        $CCFF        
0119  5F                CLRX

whereas it should have looked like this...

Code: Select all

0100  20 15             BRA        L0117
...
0113  11 A7             DW         $11A7      ;pd0C/0D: Leadin on=9038 uS
0115  08 CB             DW         $08CB      ;pd0E/0F: Leadin off=4502 uS
                                        
0117  CC FF 5F  L0117:  JMP        XMITIR

mr_d_p_gumby · Post by **mr_d_p_gumby** » Sat Nov 01, 2008 11:42 pm

There is a bug in the code generator for the HCS08 which causes that first branch offset to be off by three bytes. I know several people found this a while back, and I've already got it fixed in the next version, which hopefully I can release before too much longer.

friday · Post by **friday** » Sun Nov 02, 2008 4:34 am

thx,

robman, i took your updated file ..id=5910
but when i open this file in RM an "import failure" appears which says "the upgrade you are trying to import is not valid! it does not contain a value for remote.name"

when i click ok, nothing was loaded!

Post by **The Robman** » Sun Nov 02, 2008 9:51 am

5910 is a protocol builder file, this was posted for Mike, you were not supposed to use it. You were supposed to use the KM file that I posted.

I created an RM version for you...
https://www.hifi-remote.com/forums/dload ... le_id=5912

friday · Post by **friday** » Sun Nov 02, 2008 11:43 am

yippie yah yeah,

you are great! it seems to have folded so far everything.
now it comes the finetuning.

from the dreambox support website i have the code for my tv. 0196 that i only entered in my remote.
how can i change the button layout for this device?

thanks, thanks, thanks

friday

Post by **The Robman** » Sun Nov 02, 2008 12:25 pm

friday wrote:from the dreambox support website i have the code for my tv. 0196 that i only entered in my remote.
how can i change the button layout for this device?

That's a new subject so please start a new thread, and include as much info as possible (TV brand, model no, etc).

friday · Post by **friday** » Sat Dec 27, 2008 11:42 am

one question,

how can i slow down the signals from the upgrade you made?

all buttons i push are sent very very quick. when i want to navigate down, and i push the button for "down", it was sent too fast. so the cursor moved 2 or 3times down.

but only in this upgrade. all other upgrades/settings/keymoves are ok

Post by **The Robman** » Sat Dec 27, 2008 1:55 pm

That probably means that the leadout time is too short, so the executor would need to be fixed in PB. I don't have time to do it myself, so either give it a try yourself or see if someone else can jump in. If this is for a HCS08 remote, be aware of the bug in PB as I don't think Mike has released the fixed version yet.

jnb · Post by **jnb** » Thu Jan 15, 2009 5:56 pm

i have the same trouble with this
all buttons i push are sent very very quick. when i want to navigate down, and i push the button for "down", it was sent too fast. so the cursor moved 2 times down. or 2 times up !

Please help

friday · Post by **friday** » Mon Mar 09, 2009 4:53 am

can anyone help with this problem. anyone who knows to fix the leadout time?