RemoteChart V24

aberguerand · Post by **aberguerand** » Wed Mar 26, 2008 8:01 am

Here is an updated version of the RemoteChart table. Its purpose is to list all remotes known to be JP1able.
The chart has mainly be compiled from the RDFs in the files section and from postings in this forum.
The chart still contains a lot of question marks and probably a lot of errors. All contributions to improve this are welcomed.

Thanks to all those who already contributed !

New entries are in bold and modified ones in bold-italics.

Excel version
HTML version
Wiki version (latest)

V24 Changes :
Thanks to mdavej for the updates !

Added
Catalyst 48 URC-48C20
Charter C4000 OCAP
Dreambox DM8000
URC-6022
URC-6022X
URC-7781

Format change
Split connector/cable column.
Added hyperlink to manuals (click on model name).

_________________
Alain

UPDATE:
Remote Master now has the capability to generate the Wiki remote chart data anytime so it can always be easily updated. Contributers to the wiki site linked above can generate a CSV remote listing from RM (File > Summary > Create RDF Info File), paste into the excel2wiki converter linked at the bottom of the wiki page, then paste the result into the chart when editing the page.

Tommy Tyler · Post by **Tommy Tyler** » Fri Mar 28, 2008 7:19 pm

Alain,

Many thanks for upgrading this excellent resource.

Tommy

mr_d_p_gumby · Post by **mr_d_p_gumby** » Sat Mar 29, 2008 10:02 am

Alain--

I made a quick pass through the chart, and here are some things that I noticed that need updating next time around:

Code: Select all

15-100
IR/RM/KM Support = Yes/Yes/Yes

15-2144
JP1 Connector = Yes/1.2
Learning = No
Modem Upgrade = No
Processor = HCS08
EEPROM = 0K
IR/RM/KM Support = No/No/No
Signature = 10101010
Comments = Does not support upgrades

Atlas DVR/PVR 5 
Protocol/Extender = Yes/Yes

DirecTV (V1)
IR/RM/KM Support = Yes/Yes/Yes
Signature = DTV0/DTV0

DirecTV (V2)
IR/RM/KM Support = Yes/Yes/Yes
Signature = DTV1/DTV1

Explorer
Name = AT2000
IR/RM/KM Support = Yes/Yes/Yes
Signature = SA40/SA40

Explorer 3
Name = ER1
IR/RM/KM Support = Yes/Yes/Yes
Signature = ER10/ER10

Mundial 4
JP1 Connector = Yes

Navigator 43xx
Signature = CA00 (no 2nd signature)

Scout
JP1 Connector = Yes
Signature = SCOU/SCO0

Sky Remote (Digibox Remote)
IR/RM/KM Support = Yes/Yes/Yes
Signature = BSKY/SKY0

Sky Remote (no name)
Signature = SKYA/SKY0

URC-5650 (5651/5652)
Processor = S3C80
Signature = O5F0O5F1

URC-8811 (8810w)
Processor = S3C80+

URC-8910 (8911)
Processor = S3C80+

URC-9910 (9911)
Processor = S3C80+

URC-9960 (9962/9964)
Processor = S3C80+

BTW, the Navigator 43xx really does not have a second signature. It is probably one of the oldest UEI remotes in our JP1 catalog, dating back to around 1992.

Post by **vickyg2003** » Sat Mar 29, 2008 10:39 am

Along that line these remotes need updating next time around.

URC-1067 Extender yes
URC-6820 Extender yes
URC-8820 Extender yes
URC-10820 Extender Yes

mdavej · Post by **mdavej** » Mon Apr 14, 2008 8:21 am

Thanks for the updates, Alain. Nice work.

unclemiltie · Post by **unclemiltie** » Mon Apr 14, 2008 8:47 pm

URC-6960/6962 has an extender, it's the same feature set as the URC-9960B01 extender.

mdavej · Post by **mdavej** » Mon May 05, 2008 7:56 am

This is probably as good a place as any to keep a running list of new remotes as the come along.

- Add new remote "15-134 5-In-1 Satellite" (all other fields identical to the 15-135)
- Change 15-133 "No/No/No" to "Yes/Yes/No"

Tommy Tyler · Post by **Tommy Tyler** » Fri Jun 13, 2008 8:08 pm

Over in the Beginner's section, binky123 identified a URC-39860 as a JP1.2 with signature 10181018. Can someone who knows how (alain or mdavej?) take care of adding it to the chart?

mdavej · Post by **mdavej** » Sat Jun 14, 2008 10:50 am

It's already in there, near the bottom. But I went ahead and made all the other updates in the thread up to this point as well, which I've temporarily posted HERE?

mdavej · Post by **mdavej** » Sun Jul 06, 2008 8:37 pm

Just updated again, adding links to manuals for as many models as I could find. I need a moderator to please upload my latest excel version from the diagnosis area into aberguerand's file, assuming he hasn't made changes also.

Ube_Astard · Post by **Ube_Astard** » Tue Aug 26, 2008 7:15 am

On the list and where you have JP1 connector column it may have holes, 6 wire, yes, stereo or pads. What does that all mean? I have a 9910 and a 7544 and they both have JP1 connectors. I am trying to source a remote on ebay that I can program for a friend and am looking at a URCs 6131N, 8305, 8060 and 7510.

Thanks

Post by **The Robman** » Tue Aug 26, 2008 7:51 am

yes = obvious, it's JP1 ready

yes/1.1 - it's got a 6-pin but it's a JP1.1 remote, so it will need a JP1.1 compatible cable

yes/1.2 - it's got a 6-pin but it's a JP1.2 remote, so it will need a JP1.2 compatible cable

yes/1.3 - it's got a 6-pin but it's a JP1.3 remote, so it will need a JP1.3 compatible cable

pads = remotes like the URC-9960, which don't have a 6-pin, instead they have 6 pads. You can connect to these remotes using a "pogo pin adapter". In most cases you can also solder a 6-pin onto the pads if you like.

holes = remotes like the URC-7800 which have all the JP1 parts on board except for the 6-pin connector itself, so you would need to solder one in yourself.

6 wire = these remotes do NOT have a 6-pin connector, nor do they have holes where you can simply solder one in. In order to add a 6-pin to these remotes, you would need to solder wires to various spots on the PCB. (Not for beginners).

stereo = same as above, except the RESET line isn't exposed, which means you'll need to use a stereo headphone jack as a means of disconnecting the EEPROM from the MCU.

Post by **The Robman** » Tue Aug 26, 2008 7:59 am

and here are the descriptions from the file itself...

Not IR
Has learning capabilities, but the learned codes can not be displayed by IR through the JP1 interface (they are stored in a separate EEPROM). Adding an extra stereo interface makes that EEPROM reachable for IR.

Holes
Does not have a JP1 male connector, but has mounting holes,making it relatively easy to add a connector. An * means that the holes are located under the battery container, making it harder to get them connected

Pads
Does not have a JP1 male connector, but has pads that can be used with a pogo pin adapter.

1.x
JP1.1, JP1.2 or JP1.3 connector

6 wire
Does not have a JP1 male connector, neither mounting holes, but a connector can be added by a skilled person by soldering 6 wires to the same components as remotes that have a connector and cutting a hole in the case to make room for the connector.

Stereo
Does not have a JP1 male connector, neither mounting holes, nor a reachable RESET circuitry but a connector can be made by a (very) skilled person by soldering wires, cutting traces on the board and building a special interface cable (stereo jack) according to Tommy Tyler's method http://groups.yahoo.com/group/jp1/files ... ctions.doc Depending on the considered remotes, easier alternative versions of this interface are possible, requiring cutting less or no traces.

Ube_Astard · Post by **Ube_Astard** » Tue Aug 26, 2008 9:30 am

Thanks for your help.

mdavej · Post by **mdavej** » Tue Nov 18, 2008 4:46 pm

V24 now has JP1 Connector split into 2 columns for newbie friendliness.