Pioneer VSX-D912K

Lurker · Post by **Lurker** » Sun Jan 09, 2005 10:08 pm

I have finished everything except Auto Surround and Dialog Enhancement. If someone would capture those two functions and post the codes, I could finish.

lifeisfun, are you waiting for my upgrade? If so, I suppose I can upload it with those two functions missing.

lifeisfun · Post by **lifeisfun** » Mon Jan 10, 2005 4:51 am

If you can upload the file that would make my day !

I have captured the auto surround an dialog E but I'm confused since it gave me 2 values ..

1 159
2 213

Dialog Enhancement
1 66
2 7

Thanks

Post by **The Robman** » Mon Jan 10, 2005 9:08 am

Two signals is what we expect, but there should have been more values in the decode than what you posted. We'd need to see device codes and OBCs for each part of the signal.

lifeisfun · Post by **lifeisfun** » Mon Jan 10, 2005 4:09 pm

Ooops - sorry

Here it is :
Dialog E
1 Pioneer 165 66 BD 167
2 Pioneer 165 7 1F 186

Auto surround
1 Pioneer 165 159 06 002
2 Pioneer 165 213 54 112

I have URC9910 remote

Post by **The Robman** » Tue Jan 11, 2005 9:50 am

I just checked these codes against my master list, and I have the Dialog E code listed as "surr ch level+" so could you double check that one please.

The Auto Surround code is certainly new, so I'll add that one to the list.

Post by **The Robman** » Tue Jan 11, 2005 12:30 pm

I have just updated the master list.

lifeisfun · Post by **lifeisfun** » Tue Jan 11, 2005 3:14 pm

Rob,
the dialog E and + is on the same button
sleep and - same button as well

Shoul I press the shift button before scaning the code ?

Post by **The Robman** » Tue Jan 11, 2005 4:17 pm

lifeisfun wrote:Rob,
the dialog E and + is on the same button
sleep and - same button as well

Shoul I press the shift button before scaning the code ?

Are you saying that without pressing SHIFT, they do the + and - functions, but with pressing SHIFT they do the Dialog and Sleep functions?

If so, then yes, you should press SHIFT on the Pioneer remote before learning the signals.

lifeisfun · Post by **lifeisfun** » Tue Jan 11, 2005 5:54 pm

Ok with SHIFT Dialog E :
Dialog E
1 Pioneer 165 159 06 002
2 Pioneer 165 7 1F 186

With SHIFT Sleep:

1 Pioneer 165 72 ED 037

Post by **The Robman** » Tue Jan 11, 2005 6:32 pm

So, just to make sure I'm 100% clear here. If you're using the original Pioneer remote with your Pioneer receiver, and you press the level+ and - buttons WITHOUT first pressing SHIFT, it adjusts the levels, but if you press SHIFT first and then press them, they work the Dialog and Sleep functions. Is that right?

Are there any other shifted buttons that are missing from the master file?

lifeisfun · Post by **lifeisfun** » Wed Jan 12, 2005 4:53 am

yes, that's it ( you have to hold the shift button and press + to get Dialog E)
Looks like that's all ...

Lurker · Post by **Lurker** » Wed Jan 12, 2005 1:18 pm

Thanks for the new codes! I will add them to my 1014 upgrade and upload it soon.

lifeisfun · Post by **lifeisfun** » Wed Jan 12, 2005 2:59 pm

That would be great !

Thanks

Post by **The Robman** » Wed Jan 12, 2005 3:38 pm

When you guys with Pioneer receivers do me a favor. Could you test as many of the functions included in my master file as possible to verify which ones work on your particular receiver. If the function does something different to what's listed in the file, please let me know.

For example, I have 3 sets of left/right arrow buttons, where I don't really know what the 2nd and 3rd sets really do. There are also a couple of codes that are part of UEI setup codes but I've not found a match in any of the Pioneer files that I've looked at. These are just listed as "OBC 13" (if the OBC is 13). If any of these do anything on your receiver, again, please let me know.

My goal is to put together a spreadsheet that cross-references which codes are valid for which receivers.

You can download the master file from either of these locations:

https://www.hifi-remote.com/forums/dload ... ile_id=508
http://groups.yahoo.com/group/jp1/files ... r-List.txt

Lurker · Post by **Lurker** » Sat Jan 15, 2005 11:43 am

The code for Auto Surround works, but the code for Dialog Enhancement does not.

lifeisfun, could you please capture shift-dialog E again and double check the code? (The code for shift-sleep works.)