348601 URC-462000-xxR00 Tele2

Tiku · Post by **Tiku** » Sun Jan 24, 2021 4:21 am

Split from here:
https://www.hifi-remote.com/forums/viewt ... p?t=102694

Thanks Robman, OK i tried to check interface in IR.exe but it says ir interface fail, so i did Raw Download in RMIR, and i have attached my file in Diagnostic area by the Name Tele2, can you please tell is is there any RDF File available for my model, on the PCB It printed
URC-462000-xxR00
46100+003+0111
UEIS-12171
REV:00
Regards.

Here is my Raw Download File,PCB Pic with S00-S55 Is also inside.
https://www.hifi-remote.com/forums/dload ... e_id=26214

Post by **The Robman** » Sun Jan 24, 2021 1:05 pm

Are you using the most up-to-date version of RMIR? I ask because there's usually additional info in the raw download file. The PCB image will be perfect for getting the button codes. I will send you a PM for some additional info that I need you to gather from the remote.

It would also be useful to know what device this remote came with, so I can try to find a user manual online, as that will help me name some of the more unusual buttons, like the one between the 2 power buttons at the top and the 3 left/middle/right buttons at the bottom.

Post by **The Robman** » Mon Jan 25, 2021 1:44 pm

Work in progress RDF is here:
https://www.hifi-remote.com/forums/dload ... e_id=26216

Tiku · Post by **Tiku** » Tue Jan 26, 2021 5:01 am

Thanks Again, Ok I Updated RMIR To 2.12.1, Actually i was using 2.06.

Post by **The Robman** » Tue Jan 26, 2021 8:28 am

Now that you have the current RMIR, could you please do a fresh raw download and replace the last file that you loaded with it.

The current RDF is just a "work in progress", it's not the final article. I am waiting for the additional info that I requested via PM to complete it.

Tiku · Post by **Tiku** » Tue Jan 26, 2021 10:12 am

Ok Raw File Replaced, i also have couple of queries, why can't i see my Device in IR.exe? i have given the New correct path of RDF & MAP, I can see in RMIR, You see all my previous Upgrades i used to copy clipboard from RMIR and paste in Device/Add New in IR.exe and then upload to Remote, As i findit easy to Use IR.exe. Now Now i am stuck at This Page (See Pic)
https://ibb.co/2YZgGD1

After copying Upgrade Protocol Code what next? where to paste?
Thanks.

Post by **The Robman** » Tue Jan 26, 2021 11:24 am

IR.exe is obsolete, so I would not expect it to work, just use RMIR.

As I said before, the RDF is just a WIP so please don't expect it to work, I am still waiting for additional info from you before I can complete the RDF.

I also asked what device this remote came with as I'd like to try and find a user manual for it.

Tiku · Post by **Tiku** » Tue Jan 26, 2021 10:29 pm

I also asked what device this remote came with as I'd like to try and find a user manual for it

I don't know because i only bought Remote from my local flee market, its from some Dutch Package STB. For more Details see here Google Translate

https://www.tele2.nl/klantenservice/thu ... -koppelen/

https://www.ebid.net/ie/for-sale/tele2- ... 147703.htm

Post by **The Robman** » Wed Jan 27, 2021 7:55 am

Ah, ok. Did you read the PM that I sent you 3 days ago? I'm still waiting for some additional info from the remote in order to complete the RDF.

Post by **mathdon** » Wed Jan 27, 2021 9:43 am

Tiku wrote:Ok Raw File Replaced, i also have couple of queries, why can't i see my Device in IR.exe?

The answer is very simple. IR.exe does not support JP1.4, or indeed anything else later than JP1.3.

Tiku · Post by **Tiku** » Wed Jan 27, 2021 10:22 am

where is the Device Button in New RMIR UI so that i can i can add new device(Protocol) in it? The tutorial in the New RMIR Takes you to the Old RMIR UI Pics. Why Don't you Add RMIR Main Screen pics with the new instructions.
How to do it, i find it difficult to understand, Please see the pics.
https://imageupload.io/eu4AHCYzs1.g

Post by **The Robman** » Wed Jan 27, 2021 3:19 pm

Tiku, I'm not going to help you try to get my "work in progress" RDF working, and in fact, I now regret posting it. Until such time that you respond to my PM asking for additional info, I am no longer going to participate in this thread.

Tiku · Post by **Tiku** » Wed Jan 27, 2021 10:58 pm

The Robman wrote:Tiku, I'm not going to help you try to get my "work in progress" RDF working, and in fact, I now regret posting it. Until such time that you respond to my PM asking for additional info, I am no longer going to participate in this thread.

Sir i Replied your PM.

Post by **The Robman** » Sat Feb 20, 2021 2:15 pm

Tiku supplied some additional information, so I have updated the RDF:
https://www.hifi-remote.com/forums/dload ... e_id=26216

Tiku · Post by **Tiku** » Tue Feb 23, 2021 11:53 pm

Thanks Rob, the new RDF worked and i have upgraded my tele2 remote.