JP1 Remotes

I tried using Panasonic (OLD) and that appears to work. There does seem to be big vs little endian issue between the doc and what comes out but I was able to fix that.

Thanks all for your help.

Ron

The manufacturer is Scion Technology. The target is RCA RCRP05B remote.

Thanks

Hi,

I don't have the original remote. All I have is a description from the manufacture (in my original post) and picture of a waveform for the "Mute" key. Would that be helpful to post?

I would like to create an upgrade for a remote that uses REC80 protocol.

RMIR does not seem to have this protocol. There are RECS80(45), RECS80(68) and RECS80(90) protocols but not REC80. None of these seem to make the correct IR signals (as observed on an oscilloscope).

I received the following ...

I came across this file on the Denon site http://denon.co.uk/DocumentMaster/UK/AVR4311CI_AVR4311_IR-Codes.pdf. I would like to understand how to create an upgrade using RemoteMaster (or Keymap-master) and this file. Where do all the bits go? Are bits C6~C11 the OBC? What about Remote ID? Where do ...

I used brute force and pried it open. It left marks. After I re-soldered the pins, it works fine with and without the cable plugged in. I bought my cable from DIYGADGET.COM.

Ron

Hi Choven1218,

My issues seemed to be related to manufacturing quality of the remote. I returned the first one for a new one. Things started to work better but were still intermittent. I found that pushing the connector on to JP1 caused some of the pins of the connector to push through the circuit ...

3FG,

Thanks for your help.

RemoteGuy

I found a spreadsheet ( http://www.us.marantz.com/Marantz_RC_co ... Player.zip ) that has RC-5/RC-5 ex codes. I am not sure how to enter this into Remotemaster. A little advice would be helpful.

Thanks

The remote finally just quit working. Nothing I did made the LED light up. So I returned it for another one. This one seems to work and after I install the cable I get the following when I ran JP1xTEST.BAT:
**** FOUND A JP1.x COMPATIBLE REMOTE ON COM1! ****
Signature is 31793179
Memory address is ...

I recently bought a RCA RCRP05B Universal Remote Control and received a JP1.2/1.3 (FLASH) Serial Cable for Universal Remotes from Diygadgets today.

When I plug the cable into J3 the remote quits working meaning when I push a button nothing lights up and no IR comes out. Even after I remove the ...