I found a spreadsheet ( http://www.us.marantz.com/Marantz_RC_co ... Player.zip ) that has RC-5/RC-5 ex codes. I am not sure how to enter this into Remotemaster. A little advice would be helpful.
Thanks
Marantz NA7004 RC5 codes
Moderator: Moderators
-
vickyg2003
- Site Admin
- Posts: 7109
- Joined: Sat Mar 20, 2004 12:19 pm
- Location: Florida
- Contact:
RemoteGuy, I assume that like other Marantz 5200 and 7200 receivers that use the RC5/RC5x combo. I find the spreadsheet column labels to be a little confusing. If you have the OEM remote, why not learn a few of the codes like Home and a numbers so that you can relate these into our JP1 terms.
Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
RemoteGuy,
All of the IR signals in the spreadsheet are RC5x.
Marantz == JP1
System == Device
Command == Sub-device
Extension == OBC
The IR signals are all device 25, but the subdevices run from 0 to 119. This means that you should use the RC5/RC5x protocol executor and fill in 25 into both Device 1 and Device 2. For Device 2, also check the box for OBC>63. On the functions page, always select Type =RC5x, fill in the OBC column from the Extension Column, select RC5x Device as 25 > 63 or 25 < 64 depending on whether the Command column contains a number up to 63 or instead larger than 63. Then fill in the subdevice with the Command number. The RC5 column should remain blank.
All of the IR signals in the spreadsheet are RC5x.
Marantz == JP1
System == Device
Command == Sub-device
Extension == OBC
The IR signals are all device 25, but the subdevices run from 0 to 119. This means that you should use the RC5/RC5x protocol executor and fill in 25 into both Device 1 and Device 2. For Device 2, also check the box for OBC>63. On the functions page, always select Type =RC5x, fill in the OBC column from the Extension Column, select RC5x Device as 25 > 63 or 25 < 64 depending on whether the Command column contains a number up to 63 or instead larger than 63. Then fill in the subdevice with the Command number. The RC5 column should remain blank.