|
|
Easy Set-Up Instructions
Before attempting Set-Up, please review each step
in the instructions
to find the correct set-up code. If device (TV, DVD,
etc) does not
respond, repeat steps outlined below, and try each
code listed for the
brand of your device.
1. Turn on the device you want to set-up (ie:
TV, DVD, etc).
2. On the remote control, press the device
key for the device to be set-
up. For example, to set-up a TV, press the TV key;
to set-up a DVD,
press the DVD key, etc.
3. Press the "SET" key and hold until
the small light ("LED") on the
remote control blinks twice, then release.
4. Enter the Code for your device. If you've
done it correctly, the "LED"
light will blink twice. (Note: 'Codes' are listed
in the instruction booklet).
5. Press the "POWER" key and the
device will turn off.
|
| |
|
LCD Easy Set-Up Instructions
Before attempting Set-Up, please review each step in
the instructions and
look up the correct device set up code (found in the
instruction booklet)
prior to commencing. If your device (TV, DVD, etc...)
does not respond,
repeat the steps outlined below, and try each code listed
for the brand of your
device.
1. Turn on the device you wish to set-up (i.e.:
TV or DVD, etc).
2. On the remote control, press and hold "SET"
until the display changes
from the current device and time to [CODE SET]. (NOTE:
To exit
programming at any time, press EXIT once or allow
30 seconds of
inactivity to lapse).
3. Press "SELECT" once to begin programming.
4. Press a desired device key once (i.e.: TV).
5. Enter the Code for your device and press
"SELECT" once. If you've
done it correctly, you will see the [SUCCESS] message.
(Note: 'Codes'
are listed in the instruction booklet).
6. Press "EXIT" to exit the programming
mode.
7. Press the "POWER" key and the
device will turn off.
|
| |
|
|
|
|
