Olevia 337 TV Comcast 1067A Remote

speerrd · Post by **speerrd** » Thu Jan 17, 2008 8:22 pm

1. Device: Olevia 337
2. Type of device: TV
3. Year: 2007
4. JP1/UEI Remote model: Comcast 1067A
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)?
9. Partially working setup code? NO
10. Learning remote question? n/a

I am a newbie! IR talks to remote, downloaded remote with file from this thread ://www.hifi-remote.com/forums/dload.php?ac ... le_id=4433

Tried code161

0 nothing happens

Post by **vickyg2003** » Thu Jan 17, 2008 9:48 pm

could you please upload your IR file to the Diagnosis area in the file section, and then post a link to that file here. That would help us know what's going on.

speerrd · Post by **speerrd** » Thu Jan 17, 2008 10:01 pm

File name - Comcast Remote 1067 _Jan14_2008_Dev Code 1610
placed in diagnosis area in the file section.

I hope I did this right!

Thanks for your help!

Capn Trips · Post by **Capn Trips** » Fri Jan 18, 2008 6:59 am

vickyg2003 wrote:... and then post a link to that file here.

kupakai · Post by **kupakai** » Fri Jan 18, 2008 7:44 am

speerrd wrote:File name - Comcast Remote 1067 _Jan14_2008_Dev Code 1610
placed in diagnosis area in the file section.

You don't have the upgrade file for Syntax TV in that IR file. In the Devices section, there's only one for TV/2010, which is a different setup code, and is not even the one you mentioned in the previous post (it looks like it's for a different model). So setting the TV setup code to 1610 in the General tab won't do anything.

Nils_Ekberg · Post by **Nils_Ekberg** » Fri Jan 18, 2008 8:09 am

I think what he is trying to do is use the built in 1610 but I don't believe there is anything in the remote that works correctly with that TV. At least there was none that worked on my 337.

There are however 3 or 4 in the device section of the file area that work especially the RM ones.

speerrd · Post by **speerrd** » Fri Jan 18, 2008 9:33 am

I edited the IR file with the correct setup code 1610, Olevia tv now turns off when I press TV pwr button, vol, etc. Starnge thing is it will only do this when I have powered up the TV manually, not with the original remote that came with the tv.

kupakai · Post by **kupakai** » Fri Jan 18, 2008 10:20 am

speerrd wrote:I edited the IR file with the correct setup code 1610, Olevia tv now turns off when I press TV pwr button, vol, etc. Starnge thing is it will only do this when I have powered up the TV manually, not with the original remote that came with the tv.

First, you should still provide a link to the IR file you uploaded like the others mentioned, so other people can find it easier.

As far as I know, Comcast remotes do not have TV/1610 built in, so just putting in 1610 for the TV device in the "General" tab won't do anything since the remote can't find 1610 in the built database. In the IR file you uploaded, I don't see an upgrade code in the "Devices" tab for TV/1610, only "CBL/1376" (which the remote comes with), and "TV/2010". There should be a "TV/1610" listed in that tab if you copied over from Remote Master to IR the code from the upgrade file you listed previously.

Nils_Ekberg · Post by **Nils_Ekberg** » Fri Jan 18, 2008 10:22 am

What I was trying to say above was that the built in 1610 does not work correctly. I would suggest downloading this 1610 upgrade, open it with RM and convert it to your remote, copy it to IR and upload it to your remote.

https://www.hifi-remote.com/forums/dload ... le_id=4433

speerrd · Post by **speerrd** » Fri Jan 18, 2008 10:41 am

Thanks a lot Nils_Ekberg. It works great,. Totoaly cool. Thanks for the updated RM file and fast response to my issue.

Nils_Ekberg · Post by **Nils_Ekberg** » Fri Jan 18, 2008 10:55 am

speerrd wrote:Thanks a lot Nils_Ekberg. It works great,. Totoaly cool. Thanks for the updated RM file and fast response to my issue.

Great, glad to hear it is working.

By the way, It is my favorite TV.

drexlin · Post by **drexlin** » Tue Feb 05, 2008 11:22 pm

I have a Comcast remote and an Olevia TV as well, and I got it working up until this point. The power and volume buttons work, but the input (TV/VCR) button does not. I'm fairly new at this. Can someone point me in the right direction to get that button working?

Thanks.

Evan_s · Post by **Evan_s** » Tue Feb 05, 2008 11:35 pm

just make sure in RM that the input toggle is mapped to the button you want it on.

drexlin · Post by **drexlin** » Wed Feb 06, 2008 5:32 pm

Cool! It worked!

New problem, though...

With my old tv, i didn't have to press the TV button before adjusting the volume. The remote knew what device to use for the volume. Now, I have to hit the TV or Cable buttons before controlling that device. Any suggestions for this, or do I just have to deal with it?

Evan_s · Post by **Evan_s** » Wed Feb 06, 2008 5:36 pm

Sounds like for some reason the volume lock got turned off. Check the manual for instructions on how to change that.

JP1 Remotes

Olevia 337 TV Comcast 1067A Remote

Olevia 337 TV Comcast 1067A Remote

Comcast 1067 IR file

Re: Comcast 1067 IR file

Entered correct tv setup code with IR

Re: Entered correct tv setup code with IR

Olevia 337, New RM file works with Dev Code 1610

Re: Olevia 337, New RM file works with Dev Code 1610