Sony DVD Progressive/Interlaced?

[Zyll]

I have a Sony DVP-NS425P Progressive Scan DVD player, and am trying to use it with both a standard TV and projector. In order to switch automatically, I need to turn progressive scan on/off, but can't figure out how to do it.....

The only button for progressive/interlaced is on the front of the unit - there is no button on the remote that came with it, and not even a menu option so that I could do it with a macro....

I'd appreciate any help or ideas - I've looked at every file I can find and don't see a code for this anywhere.

[usblipitor]

This site has most, if not all, the sony codes.

There may not be an IR code for it.

If there is an IR code, a JP1 cable and a learning JP1-compatible remote might help you find it - do you have a JP1 cable and a learning JP1 remote?

For simple protocols, with a UEI remote, if you have found the correct setup code for the DVD and you are missing just a few functions, you can point the remote at the device and check out all 256 possible EFCs by pressing set-0-0-0, set-0-0-1, set-0-0-2, ... set-2-5-5 and see what happens after each one.

Good Luck,

[Mark Pierson]

If there's nothing in that list of Sony codes Steve referenced, then my guess is that the progressive scan output feature isn't available as a remote command. I've never owned a P/S player, but I think the output is an either/or proposition and not meant to be switched during normal usage.