JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Liteon LVW-1101HC1 - discrete on/off codes?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
ehart



Joined: 03 Sep 2006
Posts: 35

PostPosted: Sun Feb 04, 2007 4:18 pm    Post subject: Liteon LVW-1101HC1 - discrete on/off codes? Reply with quote

1. Device: Liteon LVW-1101HC1
2. Type of device: DVD player/recorder
3. Year: 2005 (about)
4. JP1/UEI Remote model: RS 15-2117
5. Do you have a JP1 cable? Yes
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? Yes
10. Learning remote question? N/A

Hi, does anyone have discrete codes for Liteon DVD players? All the 11xx units are pretty much the same. Actually, I'll try any code that works for any Liteon player (searches haven't turned anything up. I'm trying to avoid doing the brute force method again.

Thanks,

Eric
Back to top
View user's profile Send private message
ElizabethD
Advanced Member


Joined: 09 Feb 2004
Posts: 2271

PostPosted: Sun Feb 04, 2007 8:50 pm    Post subject: Re: Discrete on/off codes for Liteon LVW-1101HC1? Reply with quote

ehart wrote:
9. Partially working setup code? Yes
Which?
ehart wrote:
I'm trying to avoid doing the brute force method again.
Brute force for 000-255 learning or for using Open/Close or Play;Stop for ON, and Play;Power for OFF?

I don't think there are discretes, as I once combed through the Liteon files here as well but review these again if you haven't already
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4137
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3141
both use JVC protocol device 239

Try $A7 and $47. I did, it didn't work.
_________________
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride Smile
Back to top
View user's profile Send private message
ehart



Joined: 03 Sep 2006
Posts: 35

PostPosted: Sun Feb 04, 2007 11:22 pm    Post subject: Reply with quote

Quote:
Which [setup code]?

The one you mentioned below:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4137
It works fine, it just lacks discrete on/off codes.
By the way, I created that file.

Quote:
Brute force for 000-255 learning or for using Open/Close or Play;Stop for ON, and Play;Power for OFF?

I meant 000-255 learning. Which I went ahead and did. I found no discretes that way, so I agree with you that they probably don't exist.

Unless this unit uses more than one protocol....
Back to top
View user's profile Send private message
ehart



Joined: 03 Sep 2006
Posts: 35

PostPosted: Sun Feb 04, 2007 11:25 pm    Post subject: Reply with quote

p.s. I did discover that the Open/Close function will power the unit on if it is not currently on, but never powers the unit off. So this could be used as a "discrete on" as long as you don't mind the DVD drawer opening when you power on. EFC 164.
Back to top
View user's profile Send private message
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3953

PostPosted: Mon Feb 05, 2007 6:09 am    Post subject: Reply with quote

So, you can make two 2-step macros:
DiscreteON=Open/Close,Open/Close;
DiscreteOFF=Open/Close,Power
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes:Atlas OCAP URC 1056, Harmony One, OFA XSight Touch, AR XSight Touch
TVs: Panasonic TH-50PE700U; LG 65" Smart LED TV; RCVR: Pioneer VSX-D2016S;Onkyo TX-SR875
DVD/VCR: LG Blu-Ray player, Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A1 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc/CD changer: Pioneer CLD-704.
Streaming: Intel NUC PC
(But I still have to get up for my beer)
Back to top
View user's profile Send private message Send e-mail
ehart



Joined: 03 Sep 2006
Posts: 35

PostPosted: Mon Feb 05, 2007 11:54 am    Post subject: Reply with quote

Genius, thanks! I wouldn't have thought of that.
Back to top
View user's profile Send private message
ehart



Joined: 03 Sep 2006
Posts: 35

PostPosted: Thu Feb 08, 2007 10:29 pm    Post subject: Reply with quote

While clever, this technique doesn't work as well as hoped. The problem is that the DVD player ignores other commands once the Open/Close has been pressed. It insists on actually opening the drawer before taking another command.

In the end, I think I'll use the open/close as a discrete on. I actually do most likely want the drawer to open when I turn on the player, and this has the side benefit that pressing the DVD key a second time will close the drawer after loading the DVD.

I'll rely on the Power button for off and not worry about things getting out of synch.

Thanks,

Eric
Back to top
View user's profile Send private message
ElizabethD
Advanced Member


Joined: 09 Feb 2004
Posts: 2271

PostPosted: Thu Feb 08, 2007 10:35 pm    Post subject: Reply with quote

Have you tried Play;POWER for OFF ?
Include Pause if needed.

edited play;stop was wrong
_________________
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride Smile
Back to top
View user's profile Send private message
ehart



Joined: 03 Sep 2006
Posts: 35

PostPosted: Fri Feb 09, 2007 8:12 am    Post subject: Reply with quote

Thanks for the reply, Liz. I don't follow you. Why would "Play / Power" be better for "Off" than just using the Power button?
Back to top
View user's profile Send private message
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3953

PostPosted: Fri Feb 09, 2007 8:19 am    Post subject: Reply with quote

Actually, Play works as a discrete ON for many players, and perhaps that'll work for you (rather than "Open"), in which case the macros would be:

DiscreteON= Play, Stop
DiscreteOFF= Play, Power

That's what Liz was referring to in her suggestion.

By the way, I have a DVD player (Sharp) that has no discretes, and powers on using Open/Close, and after experimenting with crazy stuff like:
DiscreteON=Open/Close,<a bunch of other commands and Pauses for up to 10 secs>,Open/Close; I decided that was too hard (Long wait, keeping the remote pointed, noise, cycling of the tray, the tray hitting the cabinet door, etc) that I just switched to ToadTog.

Your 2117 has a very mature extender, in which the ToadTog function is well-proven, so you might consider going that route instead.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes:Atlas OCAP URC 1056, Harmony One, OFA XSight Touch, AR XSight Touch
TVs: Panasonic TH-50PE700U; LG 65" Smart LED TV; RCVR: Pioneer VSX-D2016S;Onkyo TX-SR875
DVD/VCR: LG Blu-Ray player, Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A1 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc/CD changer: Pioneer CLD-704.
Streaming: Intel NUC PC
(But I still have to get up for my beer)


Last edited by Capn Trips on Fri Feb 09, 2007 8:25 am; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 18131
Location: Chicago, IL

PostPosted: Fri Feb 09, 2007 8:20 am    Post subject: Reply with quote

Because PLAY will often act as a discrete on command.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
ElizabethD
Advanced Member


Joined: 09 Feb 2004
Posts: 2271

PostPosted: Fri Feb 09, 2007 10:55 am    Post subject: Reply with quote

Capn Trips wrote:
I decided that was too hard (Long wait, keeping the remote pointed, noise, cycling of the tray, the tray hitting the cabinet door, etc) that I just switched to ToadTog.

Short of getting a tripod for the 8910 and cutting a hole in the cabinet door there was not a better solution for me than the ToadTog, so I did the same. Play;Power did the job as well, but HAF fell like a rock with that slight advancement which occured when the DVD was already stopped. The additional complication was that if you actually have to walk over to the unstarted DVD (or VCR) to change or put in the disc, it can mess power state up. But, at most, two clicks away, between ToadTog and a Power toggle it's just not an issue.
_________________
Liz
Tweeking 8910, HTPro/9811, C7-7800, 6131o, 6131n, AtlasOCAP-1056B01, RCA-RCRP05B and enjoying the ride Smile
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central