Nokia Mediamaster 9800 Upgrade file

geoffroyg · Post by **geoffroyg** » Tue Dec 05, 2006 5:58 pm

I found a Nokia mediamaster 9800 S Sat receiver upgrade file in the file section (nokia9800_km612a), and I am trying to get it to work on the Remote Master 1.71, but it is not loading any information up. I have tried other upgrade file and all the information is loading properly.

Is the file corrupted on the server, may be someone have an updated UPGRADE file for that sat receiver?

Thanks a lot

Geoffroy

whompus · Post by **whompus** » Wed Dec 06, 2006 2:49 am

The file is not corrupt. Just an older upgrade that rm dont seem to like.

Try this one https://www.hifi-remote.com/forums/dload ... le_id=3911 and let us know if it works, so it can be moved from diag area to files area.

geoffroyg · Post by **geoffroyg** » Wed Dec 06, 2006 10:52 am

Thank you the file actually loaded properly in RM and all functions were mapped properly to the adequate buttons on the SLINGBOX (RDF). I exported the binary file PL and JU to the SBAV folder of the SLINBOX (using Slingbox A/V), followed instruction to set up the remote with the S1023 code but can not control the SAT RECEIVER, none of the functions worked.

Any suggections?

Thank you.

Geoffroy

geoffroyg · Post by **geoffroyg** » Wed Dec 06, 2006 12:08 pm

Just realise I did not positioned the IR emiter properly, just done it and it works fine, thank you for you help. The file can be updated on the list as you suggested, I am posting the Bin PL and JU file of the Sat Receiver for slingbox in the forum.

Thank you again

Geoffroy

whompus · Post by **whompus** » Wed Dec 06, 2006 12:21 pm

Your welcome.
Glad to hear it worked for you. I moved it to file area.

gfb107 · Post by **gfb107** » Wed Dec 06, 2006 8:34 pm

RM v1.72 can import Nokia9800 km612a

Post by **The Robman** » Wed Dec 06, 2006 10:15 pm

I edited that file earlier today so it was formatted by a more recent version of KM and I changed it from using the Manual Settings to using the Nokia Quad protocol.

whompus · Post by **whompus** » Wed Dec 06, 2006 11:28 pm

Nice....

Geoffroy, You might want to take another look at Robs redone file. It has 5 functions the rmdu file I posted is missing. Not sure what they are, but likely useful.