View previous topic :: View next topic |
Author |
Message |
lightsailpro
Joined: 23 Jul 2006 Posts: 5
|
Posted: Sun Jul 23, 2006 8:01 pm Post subject: Can not make SE830 code work, can anyone help |
|
|
Hi, I am trying to create a bin file for my FTA SE830 receiver for slingbox. I was able to control the device using Total Remote on my WM5 Pocket PC. I copied the working .ccf file to my pc and decoded using decodeCCF, then I used Remote Master to generate the bin file. I tried both JU and BL mode. But neither of them works. The following is the file converted from .ccf file. For whatever reason I can not find the NEC12 protocol, instaed I used NEC combined. Did I miss any thing? I appreciate your help.
Protocol Device SubDev OBC EFC Misc Decode UDB Function Sequence Key Panel DevName TopFreq Once Rept
NEC12 128 130 191 TR LEARNED Power On Control Sat 40.2441 0 42
NEC12 128 130 191 TR LEARNED Power Off Control Sat 40.2441 0 40
NEC12 128 130 191 TR LEARNED Power Control Sat 40.2441 0 38
NEC12 128 132 188 TR LEARNED Guide Control Sat 40.2441 0 40
NEC12 128 194 175 TR LEARNED Exit Control Sat 40.2441 0 40
NEC12 128 154 255 TR LEARNED Cursor Up Control Sat 40.2441 0 36
NEC12 128 158 254 TR LEARNED Cursor Down Control Sat 40.2441 0 38
NEC12 128 156 252 TR LEARNED Cursor Left Control Sat 40.2441 0 38
NEC12 128 152 253 TR LEARNED Cursor Right Control Sat 40.2441 0 40
NEC12 128 157 000 TR LEARNED Cursor Select Control Sat 40.2441 0 36
NEC12 128 153 001 TR LEARNED Menu Control Sat 40.2441 0 40
NEC12 128 216 237 TR LEARNED Info Control Sat 40.2441 0 40
NEC12 128 198 174 TR LEARNED Red Control Sat 40.2441 0 40
NEC12 128 210 111 TR LEARNED Green Control Sat 40.2441 0 40
NEC12 128 133 192 TR LEARNED Yellow Control Sat 40.2441 0 38
NEC12 128 202 047 TR LEARNED Blue Control Sat 40.2441 0 38
NEC12 128 154 255 TR LEARNED Channel + Control Sat 40.2441 0 40
NEC12 128 158 254 TR LEARNED Channel - Control Sat 40.2441 0 40
NEC12 128 129 193 TR LEARNED Dash Control Sat 40.2441 0 42
NEC12 128 157 000 TR LEARNED Enter Control Sat 40.2441 0 40
NEC12 128 148 124 TR LEARNED 1 Control Sat 40.2441 0 40
NEC12 128 149 128 TR LEARNED 2 Control Sat 40.2441 0 40
NEC12 128 128 189 TR LEARNED 3 Control Sat 40.2441 0 38
NEC12 128 136 061 TR LEARNED 4 Control Sat 40.2441 0 40
NEC12 128 137 065 TR LEARNED 5 Control Sat 40.2441 0 38
NEC12 128 138 063 TR LEARNED 6 Control Sat 40.2441 0 40
NEC12 128 140 060 TR LEARNED 7 Control Sat 40.2441 0 40
NEC12 128 141 064 TR LEARNED 8 Control Sat 40.2441 0 40
NEC12 128 142 062 TR LEARNED 9 Control Sat 40.2441 0 40
NEC12 128 145 129 TR LEARNED 0 Control Sat 40.2441 0 38 |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Sun Jul 23, 2006 8:43 pm Post subject: |
|
|
Try ordinary NEC1 protocol.
NEC12 might be a varient of NEC1 that needs a special parm value (I don't recall what parm value). But in that case ordinary NEC1 may still work.
Or NEC12 might represent some error in generating the Pronto Hex for the CCF file you found. Ordinary NEC1 might be correct and the NEC12 incorrect but usable.
The device is 128 and the subdevice should be left blank. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sun Jul 23, 2006 10:58 pm Post subject: |
|
|
If you post the CCF file itself, or provide a link to it if it's already on the web somewhere else, one of us can take a look at the raw hex to determine what the protocol really is. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Mon Jul 24, 2006 6:24 am Post subject: |
|
|
I didn't read carefully enough the first time, and failed to notice that the decodes indicate 40Khz, rather than the usual 38Khz.
On that issue as well, we can only guess whether the CCF was wrong, or if it was right whether the difference matters.
If 40Khz is correct and required, you can get that via JP1. |
|
Back to top |
|
|
lightsailpro
Joined: 23 Jul 2006 Posts: 5
|
Posted: Mon Jul 24, 2006 8:43 am Post subject: ccf file for se830 |
|
|
First, thank you all for your help!
What confuses me is the subdevice number. It's different for each command. Only NEC Combo allow me to type in subdevice number in Function tab. So I choose that one. If I choose NEC1, I do not know how to deal with those different different subdevice number. This receiver is not very popular yet, so I did not find any ccf for it on the web. Here is how I create a the ccf file: I found a generic one for sat receiver. Then I loaded it to my Pocket PC, then I relearn the buttons using my SE830 receiver, then I my pocket pc remote against SE830 receiver. After making sure all button works, I download the ccf file to my pc to decode. The ccf file has two controls (sat and sat2). I only trained the sat. So please ignore the sat2. You can get the ccf file here:
http://lightsail.bounceme.net/temp/se830.zip
[/url] |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Mon Jul 24, 2006 8:59 am Post subject: Re: ccf file for se830 |
|
|
lightsailpro wrote: | What confuses me is the subdevice number. It's different for each command. |
The tab stops in DecodeCCF output confused you. It is best to read that output in a program such as Excel that (when told to import that way) strictly obeys the tabs regardless of column width.
In fact your decodes have no subdevice at all. The three numbers in a row are Device, OBC, and EFC.
lightsailpro wrote: | Then I loaded it to my Pocket PC, then I relearn the buttons using my SE830 receiver |
I think the PocketPC software has an imperfect understanding of Pronto Hex. I think it has learned NEC1 signals and imperfectly represented them in the CCF file, so that DecodeIr.dll can't tell exactly which form of NEC protocol was intended.
lightsailpro wrote: | then I my pocket pc remote against SE830 receiver. After making sure all button works, |
The variation between forms of NEC is pretty subtle. Usually things mostly work even if those details are wrong.
lightsailpro wrote: | The ccf file has two controls (sat and sat2). I only trained the sat. So please ignore the sat2. |
SAT2 is Russound:13. A few of the Sat signals are Russound:12. I assume those should also be ignored. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Mon Jul 24, 2006 12:24 pm Post subject: |
|
|
The Robman wrote: | I have created the following upgrade that should work this receiver... |
It looks like you left "Main device" blank. I assume that was accidental and you should have 128 there. |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Mon Jul 24, 2006 12:26 pm Post subject: |
|
|
Rob,
Your upgrade has no device number nor subdevice number. I understand th "no subdevice" discussion, but should the device be BLANK? or should it be 128? _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Mon Jul 24, 2006 1:00 pm Post subject: |
|
|
Too much haste, I've just added the device code _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
lightsailpro
Joined: 23 Jul 2006 Posts: 5
|
Posted: Mon Jul 24, 2006 3:05 pm Post subject: Now the slingbox can not load the ir code |
|
|
Hi, Rob:
Thank you for your response and converted file. I imported the file to Remote Master, and generated the JU and PL version bin files, then copied to SBAV folder, but when I go to slingbox setup wizard, and type in S0830 (I changed the setup code to 0830) in alternative code box, I get the following message:
"The slingbox can not load the ir code you selected...". Do I need to reboot the slingbox? Maybe I miss something when generating the files, could anyone generate a bin file for me to test? I appreciate your help. |
|
Back to top |
|
|
lightsailpro
Joined: 23 Jul 2006 Posts: 5
|
Posted: Mon Jul 24, 2006 3:39 pm Post subject: It works now! |
|
|
It works now. Mistake on my side. I copied the bin file to my home computer, but trying to update the ir code using my work computer. That's why it can not find the ir code. So you can change the status for SE830 to "tested". I got great help from this forum! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Mon Jul 24, 2006 4:46 pm Post subject: |
|
|
Glad to hear that you got it sorted out. Did I get the brand name correct (ie, Globecast) as I found that by doing a Google search.
Also, is this a satellite box or a box that pulls HD from a regular antenna? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
lightsailpro
Joined: 23 Jul 2006 Posts: 5
|
Posted: Mon Jul 24, 2006 9:13 pm Post subject: |
|
|
The brand name is correct. It is not for HDTV. It is for Free To Air program. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Tue Jul 25, 2006 7:07 am Post subject: |
|
|
Let me ask the question another way, what do you have the box connected to? A satellite dish, an antenna or something else? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|