JP1 Remotes

Posted: **Thu May 18, 2006 5:38 pm**

Hey all.

I have an RS 15-2133 (kameleon 6 function) remote that I'm trying to upgrade to work with my Roomba. I'm using the upgrade from the downloads section. Here's what I've been trying:

Load the "irobot_roomba.txt" file into Keymap-Master
Select 15-2133 from the remote drop-down
Copy the "device upgrade" section to the devices tab in IR
Copy the "protocol code" section to the protocols tab in IR
In IR, I set the appropriate code (0999) on the VCR device in the general tab
File, save...
Export to WAV, then do an "Upload Wav to Remote"

and I get nothing. In IR, I'm using the RS 15-2133 0.5K RDF. When the remote wakes up, I get a single blink, but the code & upgrade aren't set. However, I can set the device codes to a preprogramed device, like my TV (0154). What am I doing wrong? Is this code not compatible with my remote? I don't have the original remote, so this is really my only option.

You can take a look at my IR file here

Also, here's my upgrade

Code: Select all

Upgrade Code 0 = 2B E7 (VCR/0999) iRobot Roomba (KM v8.43)
 60 00 1A AA A0 1D 8A 87 86 88 89 82 81 83 8B 84
 8C 85                                          
End

and my protocol info:

Code: Select all

Upgrade Protocol 0 = 01 60 (S3C8+) Custom Protocol for VCR/0999 iRobot Roomba (KM v8.43)
 41 86 01 8B 14 C4 11 00 08 05 82 01 D6 01 CC 05
 76 5B 68 FF FF FF FF FF 03 8D 01 46
End

Thanks for all the help!!

-Jeff

Posted: **Thu May 18, 2006 6:08 pm**

jrapp wrote:In IR, I'm using the RS 15-2133 0.5K RDF.

That's the wrong RDF, you should be using the 2k RDF.

Posted: **Thu May 18, 2006 6:21 pm**

Sorry, should have mentioned that I've tried that one also.

-Jeff

JP1 Remotes

RS 15-2133 Modem Upgrade

RS 15-2133 Modem Upgrade

Re: RS 15-2133 Modem Upgrade