What new remotes are JP1??

new-guy · Post by **new-guy** » Wed Jan 04, 2006 11:14 am

I recently changed my cable box to a PVR from Scientific Atlanta...
The remote is really good, but it is missing things.

So my question is: what remotes in Canada and USA have PVR functions and control for at least 4 components (5+ best), and is JP1 ready or modifyable???
If there are no retail solutions, where can I find one?

I have seen the kameleons, but I have heard their batt life is poor..?

Capn Trips · Post by **Capn Trips** » Wed Jan 04, 2006 1:08 pm

Opinions are like armpits, as everybody has a couple and most of them stink, BUT ...

Of remotes currently available specifically tailored for PVR use, the OFA URC-6131 (and it's internal clone 6131n) seem to be the JP1 remote of choice.

The down side is they are not JP1-ready out of the box.

The up-side Robman (and some of the vendors that advertise on this site) sell pre-modified 6131's. Check the first post in this thread for info on how to get these fror Rob.

Other popular JP1 remotes (staying away from Kameleons) are the 8811 and 8910/9910 - although they don't have the PVR-specific buttons. I use an HTPro (9910 clone) for all of my devices and am very satisfied. These latter remotes require no modification and are JP1-ready out of the box.

new-guy · Post by **new-guy** » Thu Jan 05, 2006 10:16 am

Capn Trips wrote:
Of remotes currently available specifically tailored for PVR use, the OFA URC-6131 (and it's internal clone 6131n) seem to be the JP1 remote of choice.

The down side is they are not JP1-ready out of the box.

I am pretty handy with the smoldering iron... so if i got one of these, what would need to be done?
just the header and a chip?

Post by **The Robman** » Thu Jan 05, 2006 10:47 am

http://www.hifi-remote.com/forums/viewtopic.php?t=2590

classicsat · Post by **classicsat** » Tue Jan 17, 2006 7:45 pm

If you can find it, the URC8017. It suits nearly perfectly for DVR use, for TiVo anyway, the way I programmed it.

Post by **The Robman** » Tue Jan 17, 2006 9:05 pm

Just FYI, IIRC URC-8017 is the model number they used for the Canadian version of the URC-8011, which is the smaller non-learning version of the URC-8811. This remote needs a hardware mod for JP1 use.