JP1 Remotes

nitty917 · Joined: 16 Mar 2006 Posts: 15

same problem here for me in Coolsat receiver. It cant even see the code i created , doesnt give me the choice to pick. i even renamed the one i created to the one that was available still didnt work.

keenez30 · Joined: 08 Apr 2006 Posts: 4

Hello,

I have a URC-9910 with individual keys.

I want to put in an upgrade for a dreambox 7020. I found the upgrade file on this site for 8910 but I figure it should work. I used RemoteMaster, loaded the upgrade file (it complained about the protocol 01 6C), changed the protocol to Dreambox. Setup code is 1237. I went to the Output tab, copied the device code to the clipboard, went to IR's Devices tab, hit edit, pasted. Repeated with the protocol except went to IR's protocol tab. I changed the code for SAT to be 1237.

When I load it to the remote and press on my SAT key, it doesn't control my Dreambox. Did I load the wrong upgrade, protocol, or something else? Thanks in advance for any help.

Cheers,

whompus · Joined: 27 Apr 2005 Posts: 540

A link to the file you used would be helpfull.

Anyway it sounds like the upgrade is a manual settings upgrade so you will have to use the protocol upgrade with it or the commands will not work.

keenez30 · Joined: 08 Apr 2006 Posts: 4

The file I downloaded was:

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=2566

BTW, what I meant with the individual keys for my 9910 is that it doesn't use the ring. I updated the protocol and device. When I entered in code 1237, nothing happened with my dreambox.

whompus · Joined: 27 Apr 2005 Posts: 540

It looks like this one that is under sat area. Give that on a try.

keenez30 · Joined: 08 Apr 2006 Posts: 4

Thanks ....

I could see the difference in the Hex key values using the Dreambox 7000 file. I just had to re-map a few of the keys and learn the Power button.

cheers

Marcyjok · Joined: 11 Dec 2005 Posts: 11

File for Dreambox 500 - please test it.

http://www.hostclip.com/dl/714829b1dc1fa7de07e8410671ba4c3b

I can't do it for next few days and I am very curious if it is working.
Created by using file from this forum

Users of DM7000 and DM7020 please test it too , it should work, only some buttons are not working when use 7k's remote for 500

bobby1234 · Joined: 18 Apr 2007 Posts: 3

Can I get a RV.bin edition somewhere?

formula1 · Joined: 19 Apr 2007 Posts: 1

Thanks for the file, but how would I test it? I just installed my slingbox. If you could give me quick step by step, I'd live to give it a shot. I'm trying to set up my dreambox 500, without success. Thanks

gfb107 · Expert Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC

I guess you haven't read the only sticky thread in the SLingbox section of there forums Using JP1 with the Slingbox
_________________
-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)

Marcyjok · Joined: 11 Dec 2005 Posts: 11

I created another file for Dreambox
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4393
but it is not working Sad

can anyone experienced do this?
I ask about it from August 2005 , no one want or can help Sad

The Robman · Posted: Sun Apr 29, 2007 12:08 pm Post subject:

Let's see if this helps. I downloaded the following file...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4393

I then opened it using RM, changed the selected remote to the JU Slingbox and re-assigned some of the buttons, the resulting RM file is here...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4522

I then used RM to create the following bin files...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4523 (JU)
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=4524 (PL)

Save both of these files in your SBAV folder, then when you're programming the Slingbox, select "Other" and enter the code S1237.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

rvandaalen · Joined: 29 Apr 2007 Posts: 15

I recently bought a slingbox a/v from the usa and wanted to use it for my dreambox 7025 here in Holland. Streaming works perfect but I can't get the remote to work with the slingbox software. I tried robman's newest files for the dreambox 7000 but these don't seem to work for the 7025. I'm not sure the 7000 and 7025 use the same remote but if I understand correctly the 7025 uses a jp1.2 remote. Is there any way to get this remote to work in the slingbox software? I'm new to this forum so excuse me for any silly questions. I still have alot of reading to do Any help/info is more than welcome. Is there anyone who has got this remote to work?

Many Thanks

rvandaalen · Joined: 29 Apr 2007 Posts: 15

keenez30
Hi,

I saw your message on the forum regarding hex files for the 7020 remote.

I myself have a dreambox 7025 but I think the 2 models uses the same remote. I'm trying to get this remote to work with my slingbox. Files for the 7000 by robman don't work. I was wondering if you have any hex/bin files available for me to test. I'm really curious if I can get this remote to work and to share this with the rest of the forum.

Many thanks &greetz from Holland,
Remko

The Robman · Posted: Mon Apr 30, 2007 12:09 pm Post subject:

keenez30 posted a link to the file that he is using in his nov 26th post above, so by all means give it a try. However, I just looked at the DM7020 file and it uses the same codes as the DM7000, so if the DM7025 really does use a different code, that file won't work for you either.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!