JP1 Remotes

Hi, all,

I have Fujitsu Plasma P42VHA20 which want to use with OFA 8060.
The ССА Pronto file works correctly with my iPAQ PDAWin.

I decoded CCF file with CCF2EFC and then analysed it with IRTool. It gave me Fujitsu protocol with one device and multi subdevices (3), that I did not find in KM.
I found a reference in KM, that Kaseikyo protocol is decoded as Fujitsu. But when I used Kaseikyo for making KM file, then IR and downloaded the upgrade mu 8060, it does not work. Seems the protocol is wrong as me upgrades for other devices work perfectly.

Can you help me with building Fujitsu protocol for my plasma, pls?
I downloaded the decoded CCF file with HEX codes FujitsuP42VHA20 Protocol Help.zip into Diagnoses area.

Out of curiosity, have you tried learning some buttons from the Fujitsu
remote on your OFA 8060 and seeing what it gets decoded as by IR?
It'll probably end up with same result since these things share the same
library, but it's worth a shot, maybe you'll get lucky and something useful
will come out.

Fujitsu is a varient of Kaseikyo, but I'm pretty sure not close enough for a Kaseikyo protocol generator by UEI or the JP1 group (I'm not sure which KM has) to handle it.

I think Jon already created a Fujitsu protocol with ProtocolBuilder and posted it somewhere in the Yahoo JP1 files area. If not, then it should be pretty easy to create a Fujitsu protocol with PB.

The Fujitsu protocol is discussed here.

The protocol code is:

Upgrade protocol 0 = 01 99 (S3C8+)
43 8C 51 8B 12 87 45 08 08 00 C8 02 44 00 C8 00
B4 55 F0 06 40 03 0C 8D 01 46
End

Thanks a lot. I will try it today.