JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Fujitsu protocol for Fujitsu Plasma is not in KM

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
HobbyMan



Joined: 11 Nov 2003
Posts: 10
Location: Moscow, Russia

PostPosted: Mon Nov 17, 2003 12:46 am    Post subject: Fujitsu protocol for Fujitsu Plasma is not in KM Reply with quote

Hi, all,

I have Fujitsu Plasma P42VHA20 which want to use with OFA 8060.
The ССА Pronto file works correctly with my iPAQ PDAWin.

I decoded CCF file with CCF2EFC and then analysed it with IRTool. It gave me Fujitsu protocol with one device and multi subdevices (3), that I did not find in KM.
I found a reference in KM, that Kaseikyo protocol is decoded as Fujitsu. But when I used Kaseikyo for making KM file, then IR and downloaded the upgrade mu 8060, it does not work. Seems the protocol is wrong as me upgrades for other devices work perfectly.

Can you help me with building Fujitsu protocol for my plasma, pls?
I downloaded the decoded CCF file with HEX codes FujitsuP42VHA20 Protocol Help.zip into Diagnoses area.
Back to top
View user's profile Send private message
sfhub



Joined: 12 Oct 2003
Posts: 287

PostPosted: Mon Nov 17, 2003 1:57 am    Post subject: Reply with quote

Out of curiosity, have you tried learning some buttons from the Fujitsu
remote on your OFA 8060 and seeing what it gets decoded as by IR?
It'll probably end up with same result since these things share the same
library, but it's worth a shot, maybe you'll get lucky and something useful
will come out.
Back to top
View user's profile Send private message
johnsfine
Site Admin


Joined: 10 Aug 2003
Posts: 4767
Location: Bedford, MA

PostPosted: Mon Nov 17, 2003 7:24 am    Post subject: Reply with quote

Fujitsu is a varient of Kaseikyo, but I'm pretty sure not close enough for a Kaseikyo protocol generator by UEI or the JP1 group (I'm not sure which KM has) to handle it.

I think Jon already created a Fujitsu protocol with ProtocolBuilder and posted it somewhere in the Yahoo JP1 files area. If not, then it should be pretty easy to create a Fujitsu protocol with PB.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Mark Pierson
Expert


Joined: 03 Aug 2003
Posts: 3011
Location: Connecticut, USA

PostPosted: Mon Nov 17, 2003 7:50 am    Post subject: Reply with quote

The Fujitsu protocol is discussed here.

The protocol code is:

Upgrade protocol 0 = 01 99 (S3C8+)
43 8C 51 8B 12 87 45 08 08 00 C8 02 44 00 C8 00
B4 55 F0 06 40 03 0C 8D 01 46
End
_________________
Mark
Back to top
View user's profile Send private message Send e-mail Visit poster's website
HobbyMan



Joined: 11 Nov 2003
Posts: 10
Location: Moscow, Russia

PostPosted: Tue Nov 18, 2003 12:08 am    Post subject: Reply with quote

Thanks a lot. I will try it today.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central