|
JP1 Remotes
|
View previous topic :: View next topic |
Author |
Message |
grins
Joined: 01 Nov 2003 Posts: 2
|
Posted: Sat Nov 01, 2003 12:39 pm Post subject: Newbie learning; probs with 8811 and Sony receiver |
|
|
I have a Sony STR-DE845 receiver, which comes with an RM-LP204 remote. I'm using a learning JP1 remote, the URC 8811 to learn and program my MX500
I learned three keys from the original sony remote onto the 8811, but only one of them work. I downloaded the learned codes into IR, and it says things I don't understand
RCVR:L1 is protocol Sony12, device 13, sub-device blank, OBC 17, Hex Cmd 88 or 89, EFC 78 or 70. It also has "+2400 -606 +1200 -604 +600 -604 +600 -604 +600 -604 +1200 -604 +600 -604 +600 -604 +1200 -604 +600 -604 +1200 -604 +1200 -604 +600 -25224 " in 'Sent repeatedly while key is held'.
First Question: or? what the heck does 78 _or_ 70 mean? Does one send 2 digit EFCs the same way one sends 3 digit codes, i.e. magic-digit-digit? This 'learned' key on the 8811 does work.
RCVR:L2 has nothing in the protocol, device, sub-device, OBC, Hex Cmd, EFC, or Misc fields, but it does have "+20 -114668 +20 -131070 +20 -131070 " in the Sent once when key is pressed field. This 'learned' key on the 8811 does _not_ work.
Second Question: No protocol? Is that even possible? Or does no protocol mean it's the same protocol as the main device, and therefore that L1 and L3 are specifying protocol and device because they're different from the main device?
RCVR:L3 is protocol Sony15, device 36, sub-device blank, OBC 96, Hex Cmd 06 or 07, EFC 002 or 250. It also has "+2400 -602 +600 -600 +600 -600 +600 -600 +600 -600 +600 -600 +1200 -600 +1200 -600 +600 -600 +600 -600 +1200 -600 +600 -600 +600 -600 +1200 -600 +600 -600 +600 -25824 " in 'Sent repeatedly while key is held'.
Third Question: Why would it have a different protocol and device? This 'learned' key on the 8811 does _not_ work.
I don't think it matters, but L1 is "go to previous am/fm tuner channel preset", L2 is "go to next am/fm tuner channel preset", and L3 is "Set sound field to normal surround".
Any help is, of course, greatly appreciated. I'm extremely grateful to all of you for all the work you've put into making my life better |
|
Back to top |
|
|
Mark Pierson Expert
Joined: 03 Aug 2003 Posts: 3017 Location: Connecticut, USA |
Posted: Sat Nov 01, 2003 1:11 pm Post subject: |
|
|
Instead of reinventing the wheel, why don't you try one of the exisiting Sony STR files in the Audio folder? _________________ Mark |
|
Back to top |
|
|
mr_d_p_gumby Expert
Joined: 03 Aug 2003 Posts: 1370 Location: Newbury Park, CA |
Posted: Sat Nov 01, 2003 1:21 pm Post subject: Re: Newbie learning; probs with 8811 and Sony receiver |
|
|
grins wrote: | First Question: or? what the heck does 78 _or_ 70 mean? Does one send 2 digit EFCs the same way one sends 3 digit codes, i.e. magic-digit-digit? This 'learned' key on the 8811 does work.
| 78 OR 70 means that the EFC could be either one of the two listed values. This is because the Sony12/15 protocol can handle two different device codes, and IR has no way of knowing which of the two EFCs would refer to the correct device code in any specific setup/upgrade.
In the Audio/0158 (the usual Sony receiver setup) setup code, device 16 is the first device code and device 13 is the second device code, so the second EFC would be used in this case.
grins wrote: | Second Question: No protocol? Is that even possible? Or does no protocol mean it's the same protocol as the main device, and therefore that L1 and L3 are specifying protocol and device because they're different from the main device?
| In this case, it means you need to re-learn the key, since it did not learn correctly.
grins wrote: | Third Question: Why would it have a different protocol and device? This 'learned' key on the 8811 does _not_ work.
| If it does not work, then it probably is a bad learn of the key. However, the Sony12/15 protocol can send both 12-bit and 15-bit signals, and it is not uncommon for Sony to mix the two on any given product. _________________ Mike England |
|
Back to top |
|
|
rhm5757 Advanced Member
Joined: 03 Aug 2003 Posts: 33
|
Posted: Sat Nov 01, 2003 5:32 pm Post subject: |
|
|
L1 is a correct learn.
L2 is a bad learn, try learning it again. The correct values for the key are Sony12, device 13, OBC 16.
L3 is the first part of a SonyDSP protocol signal, which shows up as Sony15, device 36, OBC 96. These codes are too long to be learned, but you can use the SonyDSP upgrade file to produce this code, as well as discrete codes for all the other sound fields.
Any of the 3 Sony protocols (Sony12, Sony15 and Sony20) can show up on a device, and multiple device numbers are usually used. The number after "Sony" is the length of the codes in bits. Sony ran out of device codes and kept adding more bits to get more device codes. Since there are only 128 OBCs per device in the Sony protocols, frequently more than one device code is used, which can change the length of the codes.
My Sony code site lists virtually all the receiver codes' devices and OBCs:
http://www.anycities.com/rhm5757/sony_home.htm |
|
Back to top |
|
|
grins
Joined: 01 Nov 2003 Posts: 2
|
Posted: Mon Nov 03, 2003 12:31 pm Post subject: |
|
|
Thanks for your help, everyone!
I've got the preset up and down working, and now I have the tools and the knowledge to get that sound field thing working, too.
More Karmic credits for you all
t |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|