JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

looking for code for a lexicon cp-2 surround processor

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Code Search (Closed)
View previous topic :: View next topic  
Author Message
ph0361



Joined: 06 Nov 2004
Posts: 5

PostPosted: Sat Nov 06, 2004 12:17 pm    Post subject: looking for code for a lexicon cp-2 surround processor Reply with quote

1. Device: lexicon cp2
2. Type of device: surround processor
3. Remote model: urc-8910
4. JP1 user? i could , but first i most learn.
5. Still have original remote? yes but sometimes it refuse to work
6. Checked Yahoo file section? yes but i'm lost
7. Checked Pronto file section yes same as above.

if i found the codes and i need to upgrade using jp-1 cable. i just found (few minutes ago) where to plug it on the remote. but where on the computer.

I supposed i need to use a program. What the easiest/the best to use.
Do i need more than one program?
p.s. english is not my first language.

Thanks

Daniel
Back to top
View user's profile Send private message
gfb107
Expert


Joined: 03 Aug 2003
Posts: 3404
Location: Cary, NC

PostPosted: Sat Nov 06, 2004 1:30 pm    Post subject: Reply with quote

Start by reading the first two documents linked from http://www.hifi-remote.com/forums/viewtopic.php?t=1009
_________________
-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)
Back to top
View user's profile Send private message Visit poster's website
ph0361



Joined: 06 Nov 2004
Posts: 5

PostPosted: Sat Nov 06, 2004 8:30 pm    Post subject: Reply with quote

thanks. There'S a lot to read.

I was wondering if a diy jp1 was easy and cheap. it says yes. do the part are easy to find? ( i don't live in a big city) Do i find those more in a computer store or in an electronic store?

Daniel
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 19603
Location: Chicago, IL

PostPosted: Sat Nov 06, 2004 11:38 pm    Post subject: Reply with quote

You pretty much just need 2 resistors and 1 diode, which you should be able to get anywhere. These go inside a DB25 shell, which shouldn't be too hard to find. The tricky part is the 6-hole IDC connector, which you could make by trimming down a larger hard-drive connector. All in all, most people find that it's alot quicker and easier just to buy one ready made, they only cost $14 shipped.

Maybe you live overseas, but even so, the shipping won't be much more.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
zaphod7501



Joined: 02 Aug 2004
Posts: 530
Location: Peoria Illinois

PostPosted: Sun Nov 07, 2004 12:39 am    Post subject: Reply with quote

My first 6 pin connector was made from an old CDRom audio cable. The two 4 pin connectors placed back to back , taped together and wired appropriately worked just fine. The connection between pins 1 and 2 make it easy to see the correct orientation.
_________________
Just call me Zaphod (or Steve) --- I never should have started using numbers in a screen name but I just can't stop now.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 19603
Location: Chicago, IL

PostPosted: Sun Nov 07, 2004 11:35 pm    Post subject: Reply with quote

ph0361 wrote:
What to do?

Is there a way to upload my remote (the one coming with the processor) to find them?( modification?)

Can i make them up( the code)

P.s. i'm reading a lot right now.

Thanks

Daniel

You have an original remote that works at least some of the time, and you have a JP1 learning remote, therefore you have everything you need to create the code yourself.

Here's how...
http://www.hifi-remote.com/jp1/help/

ps. Please keep this discussion in this thread, don't start spreading it across multiple threads.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
ph0361



Joined: 06 Nov 2004
Posts: 5

PostPosted: Mon Nov 08, 2004 3:43 am    Post subject: Reply with quote

sorry if i put it in different place. I have to find where it is first!
Will do my best.

Daniel
Back to top
View user's profile Send private message
ph0361



Joined: 06 Nov 2004
Posts: 5

PostPosted: Mon Nov 08, 2004 3:51 pm    Post subject: Reply with quote

If that can for of any help.

I upgrade over the phone ( strange technology) the code for the lexicon cp-2
surround sound processor is 0214.
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 19603
Location: Chicago, IL

PostPosted: Mon Nov 08, 2004 4:13 pm    Post subject: Reply with quote

We haven't seen that code before, so could you please download your remote's memory using IR.exe and then post the file in the Diagnosis Area. If UEI also sent you a list of advanced codes, please post those too.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
ph0361



Joined: 06 Nov 2004
Posts: 5

PostPosted: Mon Nov 08, 2004 4:38 pm    Post subject: Reply with quote

first i have to build my jp1 cable, than i'll send everything i can.

p.s. they only send me that upgrade code over the phone.

maybe if someone live close to them they could ask for a lot of advance code?

Daniel
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 19603
Location: Chicago, IL

PostPosted: Mon Nov 08, 2004 5:27 pm    Post subject: Reply with quote

When you get an upgrade over the phone, you should ask them to email you the advanced codes that go with it.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
skryd



Joined: 23 Mar 2004
Posts: 2

PostPosted: Sun Dec 12, 2004 1:05 am    Post subject: Reply with quote

Find a 25 pin serial header from an old 386-486 PC.
This has the hood with 9 wires running to a 10 pin header.
Cut off 2 rows of holes (I used a Dremel tool).
Solder the diode, resistors and wires in the proper place.
Voila, you have a JP-1 cable. Total time <10 minutes.
IR.exe came up and read the remote perfectly.

Robman.
Do you want MISC codes 221 (Lexicon CP-1) 443 & 482 (Lexicon CP-3)
These came from OFA. I did not get the advanced codes.
A lot of these buttons need to be reassigned, and other buttons added.
My 9910 will learn these, then I'll build an upgrade code, or try to, since I'm new to JP1.

I got a set of the raw Hex codes for both of these units from
http://ir.premisesystems.com/
Loaded the text file into a Palm handheld Memo then imported into Omniremote software and everything worked except the vol+- had to be repeatedly pressed instead of just held down.
Back to top
View user's profile Send private message Send e-mail
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 19603
Location: Chicago, IL

PostPosted: Sun Dec 12, 2004 12:18 pm    Post subject: Reply with quote

skryd wrote:
Robman. Do you want MISC codes 221 (Lexicon CP-1) 443 & 482 (Lexicon CP-3)These came from OFA. I did not get the advanced codes. A lot of these buttons need to be reassigned, and other buttons added. My 9910 will learn these, then I'll build an upgrade code, or try to, since I'm new to JP1.

I already have the basic info for MISC/0221, it uses the Denon protocol with a device code of 28. It was actually pre-loaded into just one remote, the old Maestro II.

But by all means, please create working upgrades and add them to the file section when you're done.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
jon_armstrong
Expert


Joined: 03 Aug 2003
Posts: 1238
Location: R.I.P. 3/25/2005

PostPosted: Sun Dec 12, 2004 1:07 pm    Post subject: Reply with quote

There is a CML file for the CP2 with these commands courtesy of cml2efc:

Lexicon <Surround Processor> CP-2
(Denon):28:65 EFC=030 Balance Front
(Denon):28:66 EFC=032 Balance Right
(Denon):28:67 EFC=028 Rear Delay +
(Denon):28:68 EFC=035 Param +
(Denon):28:69 EFC=031 Balance Rear
(Denon):28:70 EFC=033 Balance Left
(Denon):28:71 EFC=029 Rear Delay -
(Denon):28:72 EFC=162 Param -
(Denon):28:76 EFC=163 Mono Logic
(Denon):28:80 EFC=098 Music Logic
(Denon):28:84 EFC=099 Dolby Pro-Logic
(Denon):28:85 EFC=095 Mute Main
(Denon):28:86 EFC=097 Mute Surround
(Denon):28:87 EFC=093 Volume -
(Denon):28:88 EFC=226 Volume +
_________________
-Jon
Back to top
View user's profile Send private message Send e-mail Visit poster's website
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 19603
Location: Chicago, IL

PostPosted: Sun Dec 12, 2004 1:22 pm    Post subject: Reply with quote

And here's an upgrade for you to try, based on Jon's codes...

Upgrade Code 0 = C0 DD (Misc Audio/0221) Lexicon CP-2 (KM v8.31)
1C 00 7E E4 07 C0 1A EA AA 22 12 6A 0A 82 A2 62
42 2A 32 C2 E2
End
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Code Search (Closed) All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central