JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Discrete Codes for Strong 5390

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Slingbox
View previous topic :: View next topic  
Author Message
bevancoleman



Joined: 22 Apr 2004
Posts: 2

PostPosted: Thu Apr 22, 2004 8:26 am    Post subject: Discrete Codes for Strong 5390 Reply with quote

Does anyone know if there are any discrete on/off codes for s Strong 5390.

The Strong 5390 is a digital TV receiver with a 80gb hdd for recording. I've learnt all the basic buttons so far, but the remote dosn't have any discrete buttons Sad

I have a urc-8811 learning remote with a JP1 cables and software.
Back to top
View user's profile Send private message
Mark Pierson
Expert


Joined: 03 Aug 2003
Posts: 3006
Location: Connecticut, USA

PostPosted: Thu Apr 22, 2004 9:00 am    Post subject: Reply with quote

What are the Protocol, Device, and Sub-Device details for the signals you've learned?
_________________
Mark
Back to top
View user's profile Send private message Send e-mail Visit poster's website
bevancoleman



Joined: 22 Apr 2004
Posts: 2

PostPosted: Thu Apr 22, 2004 10:22 am    Post subject: Reply with quote

Mark Pierson wrote:
What are the Protocol, Device, and Sub-Device details for the signals you've learned?



Protocol: NEC1
Device: 0
Sub-Device: 0

The power toggle is EFC=181, OBC=0, Hex=ff

I found a code for the 5290 (presious model) which was EFC=201, however I havn't had any luck Sad
Back to top
View user's profile Send private message
princi



Joined: 06 Dec 2005
Posts: 6

PostPosted: Tue Dec 06, 2005 6:06 am    Post subject: Reply with quote

I've just bought a Strong 5390 and am trying to control it via a SlingBox.

I don't have a learning remote, therefore I'm hoping someone else out there has already done it and can point me in the direction of the upgrade file.

I know how to apply update files (applied a file for a strong 5290) but nothing is working at all.


Would greatly appeciate some assistance.

Thanks...
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Slingbox All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central