View previous topic :: View next topic |
Author |
Message |
landolfi
Joined: 12 Apr 2006 Posts: 57 Location: Chicagoland |
Posted: Sat Feb 18, 2012 1:33 am Post subject: X10 on Atlas 1055 with signature 3033 |
|
|
Hi,
I am trying to add a 0167 Home Automation device upgrade to the existing key assignments on an Atlas 1055 with 3033 signature. I pasted the device info and protocol info from Keymap Master, but when I try to assign the device code and upload to the remote, I get "Data read read back differs from data written". This is a new Tommy Tyler USB cable on Windows 7 Home. I have posted my IR file here: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=10692 |
|
Back to top |
|
|
eferz Expert
Joined: 03 Jun 2010 Posts: 1078 Location: Austin, Texas |
Posted: Sat Feb 18, 2012 4:05 am Post subject: Re: X10 on Atlas 1055 with signature 3033 |
|
|
landolfi wrote: | Hi,
I am trying to add a 0167 Home Automation device upgrade to the existing key assignments on an Atlas 1055 with 3033 signature. I pasted the device info and protocol info from Keymap Master, but when I try to assign the device code and upload to the remote, I get "Data read read back differs from data written". This is a new Tommy Tyler USB cable on Windows 7 Home. I have posted my IR file here: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=10692 |
Here's what I would recommend since you had earlier problems with a parallel cable. Make sure all of your RDF, MAPS, and IMAGE files are updated and download the most recent copy of Remote Master (RMIR/RM).
First perform a 981 reset on the remote then use the most recent copy of RMIR to download the fresh image of your remote. Afterwards use its built-in device upgrade editor (aka RM) to merge the X10 upgrade with the recent image. Save a copy for safe keeping and then upload the altered image into your remote. _________________ Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.) |
|
Back to top |
|
|
landolfi
Joined: 12 Apr 2006 Posts: 57 Location: Chicagoland |
Posted: Sat Feb 18, 2012 11:41 am Post subject: |
|
|
OK, so far so good. But now when I try to load the home automation upgrade from the file section, RMIR says: The Upgrade File you are loading is for the remote "URC-6131 PVR". I thought to try changing the RDF name in the TXT file to "Atlas &c 3033", and that does upload, but then the remote doesn't work for any function (TV, CBL, etc.). THe RMIR file: http://www.hifi-remote.com/forums/dload.php?action=file&file_id=10705 |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3367
|
Posted: Sat Feb 18, 2012 11:58 am Post subject: |
|
|
OK, this is a little confusing. When RMIR says 'The Upgrade File you are loading is for the remote "URC-6131 PVR" ', you then need to select a remote from the dropdown list. It doen't really matter which one is picked (in this case), but I would go with a non-extended remote with 2K. (URC-6131nwB00 PVR Remote 2K)
RMIR wants to know which remote the original upgrade was intended for, and of course you don't have any way to know that. It's going to use that information to extract the mapping of signals to buttons, and all of the listed possibilities use the same button mapping.
Be sure to revert to the upgrade as downloaded from here; changing the name of the remote in the .txt file won't work, as you have seen. |
|
Back to top |
|
|
landolfi
Joined: 12 Apr 2006 Posts: 57 Location: Chicagoland |
Posted: Sat Feb 18, 2012 12:18 pm Post subject: |
|
|
Thanks! That did the trick.
BTW, there wasn't really an issue with the parallel cable. One remote had been opened a long time ago (badly) and wasn't making good battery contact because the case clips weren't holding the case tight anymore, and the other had a completely unresponsive PCB. So I was able to make one good 8811 out of the two. |
|
Back to top |
|
|
|