RMIR 2.01, Tommy's USB+adapter, 6131nw

andyross · Post by **andyross** » Sat May 21, 2011 9:18 am

I recently got Tommy's USB adapter, plus the JP1 adapter so I can also use it with my older remotes.

Everything works fine with both RM and IR on an RCA RCRP05B and 10820. They also work fine with an 8810 and 8910 using the JP1 adapter.

I'm having a weird issue with RM and a 6131nw. It shows 4 entries to select when I try to do a download. No matter what entry I choose, the screen doesn't fill in (it's a 6131nw w/ 2K EEPROM and connector I added). If I change to a different tab, such as macros, then back to general, it looks OK. KeyMoves tab doesn't work at all. I can select it, but the screen never fills in with anything. Sometimes clicking in the window will show a line. It's almost like the window is not refreshing? The memory bars at the bottom always show N/A. There is no extender in this remote

IR 8.03 works fine.

gfb107 · Post by **gfb107** » Sat May 21, 2011 9:27 am

Post the IR file from a download of the 6131nw and I will figure out what the problem is.

andyross · Post by **andyross** » Sat May 21, 2011 9:54 am

Posted here:
https://www.hifi-remote.com/forums/dload ... le_id=9674

I had to use IR. RMIR would not even let me save anything from what it downloaded. The Save and SaveAs were grayed out.

gfb107 · Post by **gfb107** » Sat May 21, 2011 10:11 am

I think this has already been fixed. Try RMIR v2.02 Alpha 2, which is mentioned here

andyross · Post by **andyross** » Sat May 21, 2011 3:42 pm

That seems to have fixed it.