Page 1 of 1
Adcom GTP-500 tuner/preamp
Posted: Fri Feb 18, 2011 7:48 pm
by collinsdean
1. Device: Adcom GTP-500
2. Type of device: tuner/preamp
3. Year: 1980s (unknown)
4. JP1/UEI Remote model: Atlas Ocap 5 - 1056B01
5. Do you have a JP1 cable: No
6. Still have the original remote: Yes
7. Checked the file section? Yes
8. Checked Pronto file section? Yes
9. Partially working setup code? No
10. Learning remote question? Did not work
11. Have you tried the JP1 Lookup Tool? Yes - can't make results work
Posted: Fri Feb 18, 2011 9:23 pm
by The Robman
Did you typo the model number? Do you really mean GTP-500?
http://www.hifi-remote.com/forums/dload ... file_id=55
Posted: Fri Feb 18, 2011 10:05 pm
by 3FG
Here is the
OP's first thread at this site. We received no useful feedback.
But here is a hint: Use setup code Audio 1530 and employ 994 keymove commands to assign the EFCs that are contained in the upgrade Rob linked to.
Adcom JTP-500
Posted: Sun Feb 20, 2011 2:38 pm
by collinsdean
Yes.
My latest used Adcom pre-amp is a JTP-500.
Adcom GTP-500
Posted: Sun Feb 20, 2011 2:40 pm
by collinsdean
Yes. it was a typo it is a GTP-500.
Sorry 'bout that.
Adcom GTP-500
Posted: Sun Feb 20, 2011 9:32 pm
by collinsdean
I looked at Rob's link [a Word file:
Adcom_GTP500.txt] and I can find some commands:
"vol up, 005, vol up, 08, - vol up,,,...""
"vol down, 016, vol down, 09, - vol down,,,,..."
"Power, 005, channel up,,,,,..."
but I an unsure how these relate to 994 keymove commands.
Also, it looks like that file is assigning a setup code 2023:
"Setup: 2023, 99 = 15-2117, ..."
I am unsure what that means.
You suggest a setup code Audio 1530.
I am really confused.
Posted: Sun Feb 20, 2011 9:46 pm
by mdavej
You need to install the Remote Master program (RM) to get EFCs from all the upgrade files on this site. Reading it as text won't give you any useful information. The setup code in the file is completely arbitrary and has no relationship to the built-in code you will be using. Follow the wiki link at the top of the page to learn how to setup and use RM.
Adcom GTP500
Posted: Sun Feb 20, 2011 10:42 pm
by collinsdean
Please remember, I am a raw beginner. I got compleetly lost in downloading the RM program which led to downloading the JAVA SE dev. kit, which of course hung up about 1/3rd thru the download - on a different computer.
All I want is a few setup commands in 994 keymove:
Power
Vol +
Vol -
Mute
tuner
tape 2/video
AM/FM
There must be an easier way. I am now thoroughly lost and discouraged.
Posted: Sun Feb 20, 2011 10:46 pm
by mdavej
Here are all the EFCs from that file:
Code: Select all
1 00240
2 00080
3 00144
4 00017
5 00006
6 00030
7 00238
8 00034
vol up 00242
vol down 00082
Power 00015
Source 00142
FM/AM 00078
Tune Up 00146
Tune Down 00019
Posted: Sun Feb 20, 2011 11:20 pm
by collinsdean
Thanks.
Those are to work with the setup code: Audio 1530; correct?
I'll try them and let you know how it works.
Dean
Adcom GTP500 tuner/preamp
Posted: Mon Feb 21, 2011 4:59 pm
by collinsdean
Hooray!
It worked.
Now if that GTP500 remote only had a "mute" button.
I guess I'll just use the "Source" assigned button. Since I only use two inputs (Tuner & Tape2/Video), just hitting the "Source" toggle will toggle it to an open input jack. i.e. mute.
Close enough for retirement work.
Thanks a bunch guys.
Dean Collins