New RDF and Maps/Image Release 1.32

xnappo · Post by **xnappo** » Fri Jan 14, 2011 8:12 pm

I have released a new version of the RDFs and Maps.

Here are the changes:

+ Added extender RDF for the URC-8820N/URC-10820N from Vicky
+ Added 33063306 (Dreambox V6 URC-39931 RJ0).rdf from iibm
+ 11781178 (URC-6820N_8820N_10820N): Updated setup codes with latest DeviceMaster
+ Various Atlas RDFs: Fixed AdvCode address range
+ 31793179 (RCA RCRP05B): Improved version from 3FG. See https://www.hifi-remote.com/forums/viewtopic.php?…
+ Slingbox: Protocol and codes updates from Vicky
+ All: Added [Special Protocols] section to all RDFs, added Pause protocol to all RDFs
+ Added many new extenders from Bill! So expect an announcement from him shortly

+ Updated with latest codes from DeviceMaster:
11781178 (URC-6820N_8820N_10820N).rdf
GI97GI97 (Maestro II).rdf
HT80HT80 (URC-8080_8090-B00 Producer 8).rdf
HT80HT8C (URC-8080_8090-B02 Producer 8).rdf
HT80HT8C (URC-8080_8090-B02 with Time and Extender Support).rdf
HUD0HUD0 (URC-9800_8800_8780 Producer 8 with Extender V1).rdf
HUD0HUD0 (URC-9800_8800_8780 Producer 8 with Extender V2).rdf
/HUD0HUD0 (URC-9800_8800_8780 Producer 8).rdf
RS00RS00 (RS 15-1935_1934 7-in-1).rdf
RS70RS70 (RS 15-1995 7 in 1 wTime & Extender Support).rdf
RS70RS70 (RS 15-1995 7-in-1 with More Memory).rdf
RS70RS70 (RS 15-1995 7-in-1).rdf

The new files are in the files area and Sourceforge areas are linked.
RDFs: https://www.hifi-remote.com/forums/dload ... le_id=9353
Maps/Images: https://www.hifi-remote.com/forums/dload ... le_id=9355

Regards,
xnappo

Capn Trips · Post by **Capn Trips** » Fri Jan 14, 2011 8:41 pm

The rdf zip file downloads without the .zip extension, and therefore will not open on a doubleclick. I suggest adding the .zip extension back to it.

mdavej · Post by **mdavej** » Fri Jan 14, 2011 8:42 pm

Thanks for all the hard work on this, xnappo. Besides no zip extension, the file contains extra folders and versions like .svn\text-base and prop-base. I can deal with it, but I don't think it's what you intended.

xnappo · Post by **xnappo** » Fri Jan 14, 2011 8:59 pm

Thanks for the quick check guys. I think the RDFs are straightened out and I got the maps uploaded too.

xnappo

xnappo · Post by **xnappo** » Sat Jan 15, 2011 10:08 am

Just a note that I edited the post with a few more changes I missed.

xnappo

Post by **ElizabethD** » Sat Jan 22, 2011 11:00 am

3A333A33 (Atlas OCAP URC-1056 JP1.3 (Black)_(Silver) extender).rdf
If this file is supposed to be included in the distribution, then this change might be a good idea, but check with Bill:
change FavKey=$28,$1E,15,5
to FavKey=$22,$1E,15,5

3A333A33 (Atlas OCAP URC-1056 JP1.3 (Black)_(Silver) extender V2.10).rdf
probably should be in the distribution as well, with the same correction, because Atlas extender 2.10 is used by many people and don't need to switch to 2.11. Again I'd check with Bill.

unclemiltie · Post by **unclemiltie** » Sat Jan 22, 2011 12:11 pm

Both of those changes are correct, it is just a function of how many we want to keep around.

Post by **vickyg2003** » Thu Oct 27, 2011 7:37 pm

RS00RS00 (RS 15-1935_1934 7-in-1).rdf

needs a blank line before the [Protocols] Section.

Post by **vickyg2003** » Tue Oct 09, 2012 8:15 am

xnappo,

a couple of things that need to be changed

URC-7940 needs a phantom device added. Internally its the same as the URC-7950.

Also there has been some chatter that the RCA RCRP095B needs protocol section updated. That probably applies to the 10820 and 10820n as well. I don't think there has ever been anything done to address the PAUSE protocol overlaps, and there are some variants that need to be changed.

Post by **mathdon** » Mon Jun 09, 2014 4:13 am

I have now posted an Addendum to Version 4 of the RDF Specification. This gives Version 5 as additions and amendments to Version 4. Version 5 is required to support JP1.4, JP2, JP2.1, JP3 and XSight remotes. It is used by the forthcoming RMIR v2.03 whose development is nearing completion, see this thread.

In anticipation of this RMIR release, I have posted new or modified RDFs for JP2/3 and XSight remotes to the RDF Release Area on SourceForge. I have also packaged these, together with those for JP1.4 remotes and the corresponding maps and images, and posted it here in the RDF file section.

While doing this, I found that the two links to the Release Area from File Section/Tools/RDF Files now seem to go to the wrong place in SourceForge. Several more clicks are needed afterwards to reach the RDFs and Maps, steps that would not be obvious to the uninitiated. Could these links be corrected, please?

Edit 29 June 2014: The RDFs are now updated to include a new entry, PunchThru, in the [General] section. This is supported by RMIR v2.03 Alpha 23 but will be ignored by any earlier versions. The Addendum to the RDF Specification has also been updated to include this entry.