JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

My URC 6131 isn't sending its remote address anymore

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - General Forum
View previous topic :: View next topic  
Author Message
PeterSteele



Joined: 29 Sep 2003
Posts: 22

                    
PostPosted: Fri Jan 30, 2004 12:09 am    Post subject: My URC 6131 isn't sending its remote address anymore Reply with quote

I have two DTiVos in the same room controlled by a URC-6131. I have the TiVos setup as remote address 1 and remote address 2. I just noticed that for some reason the remote is no longer sending address code 2 when I'm controlling the second TiVo, instead it's sending the univiersal address code 0. The result of course is that when I think I'm sending a command to TiVo 2 that command is also processed by TiVo 1.

I'm not sure when this problem surfaced. I'm pretty sure I would have noticed it some time ago if it had never worked. I think it's been broken for a few days now at least though because I know I have noticed some odd behavior.

I based my setup on a two remote configuration someone pointed me to, so I don't know how to make changes to the raw data to correct this problem. Can someone take a look at my data and see if the problem can be identified. I've posted the file here:

012904.txt

I have TiVo boound to device PVR and TiVo 2 bound to device CBL/SAT. And yes I know there are some issues with my configuration where some key moves are only single byes instead of two bytes. I plan to fix this, or perhaps dig into the extender, but all the key moves appear to be working as they are and I not too anxious to go messing with things.
_________________
2 Hughes 157 hour DTiVos
Home entertainment network powered by Avcast
"I'm lovin' every minute of it!" --Cosmo Kramer
Back to top
View user's profile Send private message
gfb107
Expert


Joined: 03 Aug 2003
Posts: 3411
Location: Cary, NC

                    
PostPosted: Fri Jan 30, 2004 8:12 am    Post subject: Reply with quote

Your CBL/SAT device button is using setup code VCR/DVD 0618. This is the builtin seteup code for TiVo control that uses remote address 0.

Your PVR button is using setup code VCR/DVD 2001, which is the device upgrade that uses remote address 1.

You should change your CBL/SAT button to use setup code VCR/DVD 2002, which is the device upgrade that uses device address 2.
_________________
-- Greg
Original RemoteMaster developer
JP1 How-To's and Software Tools
The #1 Code Search FAQ and it's answer (PLEASE READ FIRST)
Back to top
View user's profile Send private message Visit poster's website
PeterSteele



Joined: 29 Sep 2003
Posts: 22

                    
PostPosted: Fri Jan 30, 2004 10:50 am    Post subject: Reply with quote

That's odd, I woner when that got changed? Now that you mention it I definitely remember needing to use the 2001/2002 codes back when I set this all up several months ago.... ???

Thanks again for your help.

Peter
_________________
2 Hughes 157 hour DTiVos
Home entertainment network powered by Avcast
"I'm lovin' every minute of it!" --Cosmo Kramer
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - General Forum All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control