Kameleon codes for my new Samsung Blu Ray BD3600

Kfink526 · Post by **Kfink526** » Sun Jan 17, 2010 7:47 pm

1. Device: Samsung BD 3600
2. Type of device: Blu Ray Player with Netflix capability
3. Year: 2010
4. JP1/UEI Remote model: Radioshack Kameleon 15-2133
5. Do you have a JP1 cable? No
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? OOps
9. Partially working setup code? The remote still works for my other devices, and i'd like to keep it that way
10. Learning remote question? I tried using the learn function, but talk about tedious! I've downloaded many of the pieces of the program to create a wav file, but i must not have done it correctly. The pieces can't find each other. So if there is just a 4 digit code i should be using, that will about fit my technical level.

Post by **The Robman** » Sun Jan 17, 2010 8:34 pm

Here's the upgrade file for this player, if anyone wants to try and help:
http://www.hifi-remote.com/forums/dload ... le_id=7041

eferz · Post by **eferz** » Tue Feb 07, 2012 5:14 pm

Kfink526 wrote:1. Device: Samsung BD 3600
4. JP1/UEI Remote model: Radioshack Kameleon 15-2133
5. Do you have a JP1 cable? No

Found a match already in our File section for the RMDU which you could use to upload to your remote should you choose to get a cable. Otherwise, I crated a wave form upgrade and IR file below.

misterp1998 · Post by **misterp1998** » Sun Feb 26, 2012 2:54 am

can't see the wave file, only the rmdu?

misterp1998 · Post by **misterp1998** » Sun Feb 26, 2012 6:46 am

ok found the wave file, doesn't seem to work though

Post by **vickyg2003** » Sun Feb 26, 2012 9:05 am

I down loaded the zip file. When working with the "upgrade.wav" I received block errors. When I used the other image it was a complete upgrade, which is not what we normally work with.

Typically when we export a wav we only do the upgrade. Then the procedure is to upload the upgrade and assign the code in this case DVD/0199 to a button.

This remote offers many different sizes of EEProms, so I don't even know what is "stock" and what are the "upgraded" size, but that could be causing problems too.

Before doing this upgrade, I'd recommend a reset to make sure the remote is functioning.
Try this upgrade. Load the upgrade and then assign the DVD button to 0199.

http://www.hifi-remote.com/forums/dload ... e_id=10745

JP1 Remotes

Kameleon codes for my new Samsung Blu Ray BD3600

Kameleon codes for my new Samsung Blu Ray BD3600

Re: Kameleon codes for my new Samsung Blu Ray BD3600