Sanyo DVR-SD450 dvd recorder/freeview receiver

[slowgrind]

1. Device: Sanyo DVR-SD450
2. Type of device: DVD RECORDER/FREEVIEW TUNER
3. Year: 2005
4. JP1/UEI Remote model: URC-7781
5. Do you have a JP1 cable? YES
6. Still have original remote? NO
7. Checked the file section? YES
8. Checked Pronto file section (at R/C)? YES
9. Partially working setup code? NO
10. Learning remote question? YES


Hi,

Cant find anything that works with Sanyo DVR-SD450, have JP1 cable and
All 4 one URC-7781, none of the factory codes work, no CCF files or anything.
Does anyone have clues where to get codes for this device.

Thank you
slowgrind
at gmail

[vickyg2003]

This is just the situation that the Lookup Tool was set up for. Cable 1219 looks like it might be what you need. Its a new code, introduced with the JP1.3 remotes, and only used be sanyo. There is nothing like it in your remote.

Try setting up an upgrade with the information you'll find in the Cable 1219 device.

If you need help with setting up the upgrade let us know.

[wnewell]

There's lots of Sanyo DVD/VCR codes in the file section. one of them might work. Otherwise you can by an original remote for the unit and then create an upgrade. Not sure how good this price is, but...

http://www.findremotes.com/remote-contr ... -42067.htm

[slowgrind]

This is just the situation that the Lookup Tool was set up for. Cable 1219 looks like it might be what you need. Its a new code, introduced with the JP1.3 remotes, and only used be sanyo. There is nothing like it in your remote.

Try setting up an upgrade with the information you'll find in the Cable 1219 device.

If you need help with setting up the upgrade let us know.

Hi,

Can you please tell me how do I export information to a file with Code 1219 for JP 1.3 remotes and then import that file into my remote URC-7781 digital 12 which is JP 1.2?

Thank you

[mdavej]

Open RM. Select your 7781 remote. Find Cable 1219 with the lookup tool. Enter the protocol, device and subdevice into RM. Click EFCs in the results of the lookup. Enter each EFC for each function in RM. Copy/paste the resulting upgrade and protocol code from RM to IR. Assign 1219 to one of your device buttons in IR.

[eferz]

1. Device: Sanyo DVR-SD450
4. JP1/UEI Remote model: URC-7781
5. Do you have a JP1 cable? YES

Found a match and recorded the IR signals with the JP1 tools to create the respective files.

• ICT file: https://www.hifi-remote.com/forums/dload ... e_id=10604
• RMDU file: https://www.hifi-remote.com/forums/dload ... e_id=10605