View previous topic :: View next topic |
Author |
Message |
TK978
Joined: 24 Jun 2008 Posts: 30
|
Posted: Mon Aug 13, 2018 12:17 pm Post subject: Upgrade won't upload....get writeRemote returned -1 error |
|
|
Trying to upgrade a Titan URC-2056-1 ....window pops up with writeRemote returned -1 . Anyone have any ideas? Tried searching that code but nothing? |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Mon Aug 13, 2018 9:58 pm Post subject: |
|
|
Probably low batteries. |
|
Back to top |
|
|
TK978
Joined: 24 Jun 2008 Posts: 30
|
Posted: Tue Aug 14, 2018 7:35 am Post subject: |
|
|
Thanks for the reply but did not work...changed batteries still get the message
Very frustraiting! Does it even if I try to upload the saved original device. |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Tue Aug 14, 2018 8:13 am Post subject: |
|
|
Do another upload attempt, then post your rmaster.err file in the diagnostics area. It's located in the folder where you have Remote Master installed. |
|
Back to top |
|
|
TK978
Joined: 24 Jun 2008 Posts: 30
|
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Tue Aug 14, 2018 10:26 am Post subject: |
|
|
If you can put the actual file in our diagnosis section, I can open it. Otherwise someone else will have to help you as that site is blocked by my work firewall. |
|
Back to top |
|
|
TK978
Joined: 24 Jun 2008 Posts: 30
|
Posted: Tue Aug 14, 2018 11:45 am Post subject: |
|
|
I posted in diagnosis area Titled : URC-2056 Upload Issue by author TK978
Thanks |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4519
|
Posted: Tue Aug 14, 2018 12:19 pm Post subject: |
|
|
In the future, just upload the actual file rather than have the download point to the same 3rd party URL. Please don't post the entire text contents of the file in the description. I have edited your file to meet these requirements.
http://hifi-remote.com/forums/dload.php?action=file&file_id=25295
In any case, the relevant lines are these:
Code: | Starting upload
Interface Name = NULL
Port Name = NULL
Testing interface: JP1.X Serial
Port Name = COM3
Opened on Port COM3
Opened interface type 1
Interface opened successfully
Base address = $DC80
Data writing phase failed, bytes written = -1 instead of 4864. |
Seems like the connection is fine. If fresh batteries didn't do the trick, then I don't know exactly what's going on. Maybe another expert will chime in. |
|
Back to top |
|
|
TK978
Joined: 24 Jun 2008 Posts: 30
|
Posted: Tue Aug 14, 2018 1:30 pm Post subject: |
|
|
Thanks for all your help....maybe just an issue with that remote |
|
Back to top |
|
|
|