View previous topic :: View next topic |
Author |
Message |
dabigchina
Joined: 09 Apr 2008 Posts: 2
|
Posted: Wed Apr 09, 2008 8:57 pm Post subject: trouble with Universal Electronics Atlas 1056 |
|
|
I have an Atlas 1056 which has a strange problem. I have been able to program everything successfully. However, for some reason the OK/select button on the remote seems to be bound to the cable box. Therefore, whenever I press the select/ok button, it will automatically send the signal to the cable box, regardless of what mode it is in. I have tried to wipe the remote settings but the problem persists. What am I doing wrong? Does this have something to do with the fact that I got the remote from Time Warner Cable? |
|
Back to top |
|
|
unclemiltie Expert
Joined: 21 Jan 2004 Posts: 1795 Location: Pittsburgh, PA |
Posted: Wed Apr 09, 2008 9:38 pm Post subject: |
|
|
There are numerous settings in the remote that could do this:
1: a macro on the OK button, which then changes the definition
2: a keymove on the TV/OK button which then changes the definition
3: a learn on the TV/OK button
All of these have been seen in the Atlas configurations. If you post your IR file in the diagnostic section (with a pointer here) I'd be more than happy to look at it for you and give you a hint as to what is going on.
-bill _________________ this JP1 stuff is a sickness! |
|
Back to top |
|
|
dabigchina
Joined: 09 Apr 2008 Posts: 2
|
Posted: Wed Apr 09, 2008 11:20 pm Post subject: |
|
|
I used the stickied MFR reset code and while I managed to wipe all my device programming away the enter key issue is still present and curiously the channel keys are still bound to the cable box. Is there a complete reset code i could use to wipe all settings and macros without buying or making a JP1 cable? |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Thu Apr 10, 2008 9:04 am Post subject: |
|
|
Please post your IR file. It sounds like you have channel lock set. |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Thu Apr 10, 2008 11:14 am Post subject: |
|
|
She doesn't have a cable, vicky.
To clear the channel (number) lock, you should follow the procedure on page 17-18 of the manual.
Briefly:
Quote: | Select CBL Device mode.
Press and Hold in the SETUP key until the CBL button red light flashes twice and then release the SETUP key.
Enter in 9-7-3 (Red light will blink twice after the 3).
Press and release the Channel Down key
CBL will blink 4 times to show you have CLEARED CBL channel lock. |
Don't know about the OK/Select button. That's not part of the Channel select group. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer)
Last edited by Capn Trips on Thu Apr 10, 2008 3:23 pm; edited 1 time in total |
|
Back to top |
|
|
MaskedMan Tivo Expert
Joined: 10 Feb 2004 Posts: 1006 Location: Boone, IA |
Posted: Thu Apr 10, 2008 12:22 pm Post subject: |
|
|
To enable the channel lock you use CH UP, to disable the ch lock you use CH DOWN. _________________ Edmund |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Thu Apr 10, 2008 3:24 pm Post subject: |
|
|
MaskedMan wrote: | To enable the channel lock you use CH UP, to disable the ch lock you use CH DOWN. | Yeah, like I said. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
bravebaker
Joined: 02 Oct 2008 Posts: 1
|
Posted: Thu Oct 02, 2008 1:46 pm Post subject: a fix that worked for me |
|
|
I found this thread through Google.
I was able to fix this problem by replacing the batteries in my remote. I put the old batteries back and the problem returned so I'm pretty sure that low voltage was causing the remote to malfunction in this specific way.
It would also do the same thing on other buttons intermittently, but always on the OK button in DVD mode.
Some additional info for Google to scrape:
My remote has 1056B01-L on the back. The cable guy brought it for use with my SA HD8300C DVR/STB. |
|
Back to top |
|
|
speaker.guy Exile Island Resident
Joined: 17 Apr 2007 Posts: 260
|
Posted: Thu Oct 02, 2008 3:56 pm Post subject: |
|
|
"My remote has 1056B01-L on the back. The cable guy brought it for use with my SA HD8300C DVR/STB."
You will be pleased to know that you have the learning version of the remote!
Not a lot of those available... |
|
Back to top |
|
|
|