Page 2 of 3
Posted: Sun Sep 14, 2014 2:21 pm
by alanrichey
Great. Thanks for that, here's hoping your hard work hasn't been in vain.
Liland: Here is the Remote
https://www.hifi-remote.com/forums/dload ... e_id=12745
Posted: Tue Sep 16, 2014 10:56 am
by Liland
Thank you so much to both of you.
It works great.
Liland
Posted: Tue Sep 16, 2014 11:13 am
by alanrichey
Thank goodness for that
And thanks for your help as well and quick feedback. I'll upload it for other users.
Posted: Sun Sep 21, 2014 3:22 am
by Liland
Hi Alan
Just a quick question
When I use the D-pad:
It activates a double command when i press once.
For example if there's a menu and I pressed down. It will go down to steps for every activation instead of one step.
Is there a way to fix that or is it to time consuming?
Best regards
Liland
Posted: Sun Sep 21, 2014 3:43 am
by alanrichey
No, it's a quick fix. The default is to send the IR burst 3 times to ensure good reception. But with a very sensitive receiver it can react to 2 of the bursts. So we need to change the repeat rate to zero.
I can't do it but I am sure 3FG can do it for us.
Posted: Sun Sep 21, 2014 5:43 am
by Liland
Sounds great you guys are really helpful
Posted: Wed Sep 24, 2014 10:16 am
by 3FG
Oops, this slipped my mind. Try this:
Code: Select all
[Nokia36 no repeats]
PID=01 FF
DevParms=Device,Sub Device,X:4
DeviceTranslator=Translator(0,8,0) Translator(1,8,8) Translator(0,8,16) Translator(2,4,28)
FixedData=00 00 00 00
CmdParms=OBC=0
CmdTranslator=Translator()
Code.S3C80=47 93 41 8B 12 87 44 00 00 00 54 9C 2C 00 54 00 22 9C 40 00 CE 00 76 76 00 01 6B 03 B6 05 80 0C 04 10 07 10 06 0A FA 1C 1E F6 01 4C 4C 00 87 64 03 5C 04 F6 FF 47 4E 37 44 F4 68 07 5C 02 F6 FF 47 1C 14 F6 01 4C AF 1C 18 F6 01 4C 90 C6 90 C6 28 C6 56 C2 03 2E C6 F8 00 4F F6 01 58 2A F7 5A E6 AF
Posted: Wed Sep 24, 2014 1:10 pm
by alanrichey
Posted: Fri Sep 26, 2014 12:13 am
by Liland
Thanks, problem is now solved
Posted: Fri Sep 26, 2014 1:46 am
by alanrichey
Good
Posted: Thu Oct 02, 2014 4:00 pm
by Liland
I'm so sorry guys, but now a whole new problem has emerged.
Every button seems to work just fine on the remote, except for the power on button.
I believe it sends the signal, but I think the box won't react to it because the signal is too short. Can this be fixed?
If it can't be fixed, then this means I can't turn on my TV when I'm away from home.
Best regards
Liland
Posted: Thu Oct 02, 2014 11:10 pm
by alanrichey
Assuming the original one worked then I'm afraid not. I understand there might be a way for one button to repeat and one not to but that is way over my head. Maybe 3FG can help ?
Posted: Thu Oct 02, 2014 11:37 pm
by 3FG
Code: Select all
[Nokia36 repeats on Power]
PID=01 FF
DevParms=Device,Sub Device,X:4
DeviceTranslator=Translator(0,8,0) Translator(1,8,8) Translator(0,8,16) Translator(2,4,28)
FixedData=00 00 00 00
CmdParms=OBC=0
CmdTranslator=Translator()
Code.S3C80=47 93 41 8B 12 87 44 00 00 00 54 9C 2C 00 54 00 22 9C 40 00 CE 00 76 76 00 01 6B 03 B6 05 80 A6 07 0C EB 03 46 06 F0 0C 04 10 07 10 06 0A FA 1C 1E F6 01 4C 4C 00 87 64 03 5C 04 F6 FF 59 4E 37 44 F4 68 07 5C 02 F6 FF 59 1C 14 F6 01 4C 76 07 01 6B 05 F6 01 0A 7B D7 AF 1C 18 F6 01 4C 90 C6 90 C6 28 C6 56 C2 03 2E C6 F8 00 4F F6 01 58 2A F7 5A E6 AF
Posted: Fri Oct 03, 2014 12:59 am
by alanrichey
Wow that was quick
One of these days you must explain to me how you do that.
Revised BIN files at
https://www.hifi-remote.com/forums/dload ... e_id=12804
Posted: Fri Oct 03, 2014 2:34 am
by Liland
Great work guys, again it works great...
Thanks