Need help adding new codes to your Slingbox, this is the place to ask. You're welcome to ask general Slingbox questions here, but be aware that most of us are not Slingbox experts.
I am in desperate need of help with the Boxer DVB-T box RTI90.
I have tried every Sagemcom model In the set up guide on slingbox, but with no luck.
I have also tried Alan Ritchies JP1 file for Sagemcom RT190.
The slingbox I use is the slingbox 350 and I've tried with the built in IR blasters and the IR blaster extender.
I have been in contact with the UK support for slingbox. They have also logged on to my account and try for them self.
I have been in contact with the US support and they have also log onto my account buy remote support and have tried all optional Sagemcom models plus they have tried Alan Ritchies JP1 file and they say it doesn't work.
I've just revisited this, having assumed that you had done things correctly. Big error
As it turns out I have never built a Custom Remote for the Sagemcom RTI90 so I have no idea what Custom Remote you are talking about (maybe the Sagem RTI90 ?).
So I have now checked out the SagemCom boxes. The Logitech database does not have the RTI90 but it does have the RTI95. Unfortunately it uses an <unknown> IR Protocol.
So once again I have to plead for help from the experts (Sorry about that, but if one of you wants to talk me through this one off-forum I might be able to do it myself next time) I have built the ICT file and uploaded it at https://www.hifi-remote.com/forums/dload ... e_id=12740
I suspect the result will be the same as my attempts, but please install your working remote onto my Harmony account. I use the standalone desktop software:
Al,
This looks like a 36 bit version of Nokias32. However, there is a lot of jitter in the learns, and I'm not able so far to get decodes which are reasonable. You've learned several repeats of most of the functions, so we can see that the learns show different timings among the repeats of a single function. So I'm inclined to think that the issue with the learned signal is not a problem with the Harmony signals-- if it were we'd get the same timing on each repeat.
When I have this kind of problem with my Widget, it is caused by an excess of IR light from the remote, and I need to pull the remote away from the widget. I usually pull it away until the indicator light stops flashing, and then move the remote a bit closer. Another possible cause of jitter in learns has been pointed out by Vicky: If a warm surface is nearby, the IR emitted by the warm material may overload the widget.
Anyway, I hope you're willing to try learning the signals again.
Al,
Actually, I spoke too soon. I think we have enough redundancy to be sure of all of the signals except Last Channel and Exit, which both have the same OBC. So I hope you haven't already started into learning again.
3FG wrote:Al,Actually, I spoke too soon. I think we have enough redundancy to be sure of all of the signals except Last Channel and Exit, which both have the same OBC. So I hope you haven't already started into learning again.
This executor is going to take a little longer. I had expected to be able to just modify the Nokia32 executor to send the extra 4 bits, but it looks like I'll need to use a different approach.
