bin for Hikari TV PM-700

Post by **The Robman** » Sun Jun 19, 2011 12:49 pm

Well something's off then, because a protocol upgrade was included in the bin, which isn't needed if it's standard NEC1.

alanrichey · Post by **alanrichey** » Mon Jun 20, 2011 3:27 am

Maybe I have a problem with my files. Can you try this :

1. Create an RMDU using NEC1 and Device code 172.

2. Export a BIN file

3. Import the file back in.

4. My Remotemaster is importing it as NECx2 and Device 172.172

Just me ?

Post by **The Robman** » Mon Jun 20, 2011 11:34 am

Something's weird is going on here. Everytime I selected NEC1 in RM the Output tab would show a custom protocol. So, I closed RM and started RM 1.98 and verified that the problem did not exist there. Then I fired up RM 2.01 again and this time it didn't show a custom protocol, so I saved a bin file and checked it (using frhed) and it still includes a custom protocol. I then imported the bin file back into RM and sure enough, it shows the custom protocol too.

So, I closed RM again and fired up RM 1.98 once more, tried saving the bin file again and checked it using frhed and there's still a custom protocol there, even though it doesn't show one on the Output tab.

Hopefully Greg will jump in here and see if he can figure out what's going on.

alanrichey · Post by **alanrichey** » Mon Jun 20, 2011 1:58 pm

Glad it's not just me.

gfb107 · Post by **gfb107** » Mon Jun 20, 2011 7:48 pm

Fixed in RM/RMIR v2.02 Alpha 3

Post by **The Robman** » Tue Jun 21, 2011 7:46 am

Thanks Greg, that does seem to have fixed it. I have updated Alan's bin files here:
https://www.hifi-remote.com/forums/dload ... le_id=9698

Nikushima, could you give it another try please?