View previous topic :: View next topic |
Author |
Message |
Lomala
Joined: 09 May 2005 Posts: 5
|
Posted: Mon May 09, 2005 8:27 pm Post subject: Data read back differs from data written |
|
|
I have new USB JP1. I can down load from my remote replay (true replay) code 3402w01 model trying to use the using OEM3OEM (ReplayTV Version2).rdf file. it has everything I need and is how it was originally identified. Now I can download from the remote and it identifies as Replay Tv /Showstopper Version 1. But when i try to upload anything i always get the Data read back differs from data written. I have tried selecting File/new ReplayTV Version2 and then trying to upload a clear code list. does not work. Any thing I am missing right now? Please let me know, hopefully i am missing some stupid switch or something. |
|
Back to top |
|
|
End_r
Joined: 10 May 2005 Posts: 3
|
Posted: Tue May 10, 2005 8:49 pm Post subject: |
|
|
I am having a similar problem. I have a brand new 3 foot long USB JP1 I ordered from FileBug. My remote is a URC-8090 B01. My 6 foot long USB JP1 is a few months old but always worked fine. Unfortunately that cable is with my brother. I ordered the 3 foot one as a replacement. I can download from the remote seemingly flawlessly. When I try to upload anything I get "Data read back differs from data written". When I download to see what was written to the remote nothing seems to have changed. Any help would be most appreciated.
Thanks! |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Sat May 21, 2005 7:40 am Post subject: |
|
|
Any resoolution to this problem? _________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
End_r
Joined: 10 May 2005 Posts: 3
|
Posted: Sat May 21, 2005 12:17 pm Post subject: |
|
|
Well the resolution for me was to wait for my old 6 foot cable to be mailed baack to me. Once I had that I was able to upload and download to my remote without incident. I don't know what the problem is with the 3 foot cable. I imagine it's probably a bad chip or something. Not much I can do to troubleshoot it. If I open it I can no longer return it which is what I plan on doing.
Sorry I can't be more helpfull. I guess noone else could either. <not a single reply from anyone> |
|
Back to top |
|
|
Filebug JP1 Vendor
Joined: 21 Sep 2003 Posts: 74 Location: Mechanicsburg, PA |
Posted: Sat May 21, 2005 12:51 pm Post subject: |
|
|
I have isolated this problem to the Delcom USB chip. They must have made a change to the code they programmed into this chip because the older chips do not cause any errors. I will be contacting them Monday to discuss this issue. In the meantime, please send me an email at jp1@filebug.com for return and replacement information. _________________ -Tom |
|
Back to top |
|
|
End_r
Joined: 10 May 2005 Posts: 3
|
Posted: Sat May 21, 2005 12:56 pm Post subject: |
|
|
Thanks Tom! Your customer support has been outstanding! I appreciate the speed with which you approached this problem. I haven't been dissappointed with the 6' cable I purchased from you. I'm sure I'll be just as pleased with a new 3' cable with a working chip.
Thanks again for working through this with me. |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Sun May 22, 2005 6:47 am Post subject: |
|
|
I'd say this must have something to do with the remote as well. The cable works on my URC8910, but not on RS-2117.
BTW, when did you get your old chips? I bought mine on April 13, 2005.
Thanks
Filebug wrote: | I have isolated this problem to the Delcom USB chip. They must have made a change to the code they programmed into this chip because the older chips do not cause any errors. I will be contacting them Monday to discuss this issue. In the meantime, please send me an email at jp1@filebug.com for return and replacement information. |
_________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
Filebug JP1 Vendor
Joined: 21 Sep 2003 Posts: 74 Location: Mechanicsburg, PA |
Posted: Sun May 22, 2005 7:50 am Post subject: |
|
|
Old chips were from 11/04 batch, new chips were ordered 4/4/05. Have you tested any of your chips to see if they are causing the same problem? You have to upload different data than is in the remote already. ie. do a download, change something, and then upload it. This is when the error occurs. _________________ -Tom |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Sun May 22, 2005 1:09 pm Post subject: |
|
|
Yes I tested not only downloading but with uploading as well. I will do another test tonight if I have time.
Have you tried to test the new chips with other remotes?
Filebug wrote: | Old chips were from 11/04 batch, new chips were ordered 4/4/05. Have you tested any of your chips to see if they are causing the same problem? You have to upload different data than is in the remote already. ie. do a download, change something, and then upload it. This is when the error occurs. |
_________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Mon May 23, 2005 6:58 am Post subject: confirmed |
|
|
OK. I have done more tests with the my usb interface. It appears all my USB chips have the same problem (ordered on April 13). Have to give delcom a call today. _________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Mon May 23, 2005 9:56 am Post subject: |
|
|
Hi, since my first order was on April 13 and they are not working correctly. Could you please check the version of the firmware?
I got the following response from delcom:
What firmware version do have that works and that now doesn't work?
To read the firmware version, run one of are sample programs ( the
samples
programs display the firmware version).
Currently firmware version is 11.0.
Doug Lovett
Delcom Engineering
200 William Street
Suite 302
Port Chester NY. 10573
(914) 934-5170
(914) 934-5171 Fax
www.delcom-eng.com
Filebug wrote: | Old chips were from 11/04 batch, new chips were ordered 4/4/05. Have you tested any of your chips to see if they are causing the same problem? You have to upload different data than is in the remote already. ie. do a download, change something, and then upload it. This is when the error occurs. |
_________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Mon May 23, 2005 10:01 am Post subject: how to check firmware version |
|
|
hi, all:
if you have a working USB cable, would you please help me to identify the firmware version?
Here is the sample code, you can download from delcom site or from my site (either one is ok):
download sample program from delcom:
http://www.delcom-eng.com/downloads/USB_WIN.exe (28KBytes)
Download sample program from diygadget:
http://www.diygadget.com/downloads/USB_WIN.exe (28KBytes)
Here is a screenshot of the sample program, the red circle tells the version number:
Thanks _________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Tue May 24, 2005 9:44 am Post subject: |
|
|
anyone can help me?
thanks _________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
Herbie
Joined: 02 Feb 2004 Posts: 81
|
Posted: Tue May 24, 2005 11:31 pm Post subject: |
|
|
Just replied to your PM, but for the benefit of everyone else:
My 100% flawlessly working interface reports as such:
Version 9
12/9/2002
Hope that helps, sorry to hear you have problems. _________________ TiVo FREAK!
Brutalizing my 15-1994 since 2000, thanks to JP1
Now abusing a 6131m, 2116, and 2104 too! |
|
Back to top |
|
|
prelude JP1 Vendor
Joined: 26 Jun 2004 Posts: 119 Location: Canada |
Posted: Wed May 25, 2005 6:52 am Post subject: |
|
|
Thank you very much!
Not sure if delcom can fix the problem by releasing a new USB driver....
Herbie wrote: | Just replied to your PM, but for the benefit of everyone else:
My 100% flawlessly working interface reports as such:
Version 9
12/9/2002
Hope that helps, sorry to hear you have problems. |
_________________ Get the coolest diy gadgets from http://www.diygadget.com today! |
|
Back to top |
|
|
|