View previous topic :: View next topic |
Author |
Message |
highlander317
Joined: 10 Jul 2006 Posts: 5
|
Posted: Mon Apr 12, 2010 7:56 am Post subject: Creating IR signals to unlock USB port on LG TVs |
|
|
I found this site that can activate the usb port on an lg lcd tv using a smartphone. Sadly the smartphone software is free for only 10 days but if i can use a one for all remote it will last for ever(hopefully). As i don't have a smartphone without infra red the one for all remote is my only option rather than spend more money on another tv.
This site explains how to do it but the codes they give are 3 and 5 digits.
Quote: | This is for all Universal Remotes to easily access the service menus EZ Adjust & In Start with existing firmware.
Remotes - Any Universal Remote that can send NEC 1 device 4 codes on the fly : Eg. All One for All/Radio Shack universal remotes.
Codes: For older remotes whcih use 3 digit Extended Functional Codes (EFCs)
1] EZ_Adjust = 018
2] IN_Start = 019
For Newer remotes which use 5 digit EFCs
1] EZ_Adjust = 00018
2] IN_Start = 00019
Procedure for all One for All universal remotes:
PRESS TV mode -> PRESS MAGIC/SETUP BUTTON ONCE -> ENTER EFC
All other NEC1 device 4 conforming universal remotes please refer to the user manual to execute these codes on the fly. Users feel free to add for specific brands |
Any ideas anyone be very grateful
* EZ-Adjust = 00018
* IN-Start = 00019
* POWER-ONLY = 00014
* IN-Stop = 00015 |
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Mon Apr 12, 2010 9:04 am Post subject: |
|
|
Oh so that's what Sangos was doing with the LG 47LH40 codes
According to the http://openlgtv.org.ru/wiki/
The LG LCD LH series have a USB port that is designated only for service use by LG. By sending two codes, you can add a new menu on your TV called USB. In simple terms your LCD TV becomes an HD media player.
You can even connect your external hard drive and watch movies from it.
With a UEI remote that is capable of sending EFCs, Extended Function Codes, you can perform this hack. This would include most "One for All" remotes, Many Radio Shack remotes, 15-100, 15-133, 15-134. 15-135, and MANY OEM Cable remotes
You first need to find a setup code that sends a Nec1 device 4 signal. You can then send and the EFC by doing a short press of the Setup key, which might be called [SET],[P],[Magic] followed by the EFC for EZ menu, and then repeat that procedure for the EZ In_Start EFC you should be good to go. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Mon Apr 12, 2010 10:38 am Post subject: |
|
|
And to answer the next question, which setup codes use NEC1-dev 4, the main ones are TV/0030 and TV/0178, as those are in almost every remote.
If you have a remote that doesn't have either of those setup codes, you can either use the Lookup Tool to find another setup code, or just post back here with the model number of your remote and we'll let you know if there's an alternative code that you can use.
Remotes to avoid, because they don't have an NEC1-dev4 code are:
URC-6541
URC-7540
URC-7541
URC-8550 / 5550 (Topline)
Dreambox v1
Sky Digital 3
Sky Digital v2
Toshiba CT-90047 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
trinjar
Joined: 24 Apr 2010 Posts: 3
|
Posted: Sat Apr 24, 2010 1:52 am Post subject: |
|
|
Is it possible to activate usb with a ucr7525 remote? I tried to send codes after pressing magic button but it doesnt seems to work. Magic button is used to switch between TV and SAT. Am I missing something? I am totaly new to this
/Simon |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3371
|
Posted: Sat Apr 24, 2010 8:58 am Post subject: |
|
|
I think you mean URC-7525.
I Googled ucr7525, and another, more informative post of yours showed up. In that post you said that you tried setup code 11265. However, the URC-7525 does not have this setup code. Instead you could use 10178.
To assign a setup code:
1) Press Magic until 2 blinks
2) Enter 10178
The remote should blink twice to indicate that it has accepted the setup code.
Next,
1) Press Magic briefly
2) Enter 00018 or 00019 |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21271 Location: Chicago, IL |
Posted: Sat Apr 24, 2010 11:45 am Post subject: |
|
|
UPDATE: the lgusb.wikispaces.com page has been deleted, the hack info can now be found here: http://openlgtv.org.ru/
Just for documentation purposes, the hack in question is discussed here:
http://openlgtv.org.ru/wiki/index.php/LG_USB_Port_Hack_on_2009_LH_series
And the section that specifically uses a remote hack is here:
http://openlgtv.org.ru/wiki/index.php/IR_Hack
(The section that discusses OFA remotes is about 1/2 way down the page)
Quote: | This is for all Universal Remotes to easily access the service menus EZ Adjust & In Start with existing firmware.
Remotes - Any Universal Remote that can send NEC 1 device 4 codes on the fly : Eg. All One for All/Radio Shack universal remotes.
Codes: For older remotes whcih use 3 digit Extended Functional Codes (EFCs)
1] EZ_Adjust = 018
2] IN_Start = 019
For Newer remotes which use 5 digit EFCs
1] EZ_Adjust = 00018
2] IN_Start = 00019
Procedure for all One for All universal remotes:
PRESS TV mode -> PRESS MAGIC/SETUP BUTTON ONCE -> ENTER EFC
All other NEC1 device 4 conforming universal remotes please refer to the user manual to execute these codes on the fly. Users feel free to add for specific brands.
Credit: Thanks to Vicky2003 from the JP1/Hifi remote.com forums who decoded these remote control EFCs from the LIRC/IR Hack codes in this wiki |
The JP1 thread where these codes were first discussed is here:
http://www.hifi-remote.com/forums/viewtopic.php?p=85156#85156 _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Last edited by The Robman on Fri Sep 16, 2011 9:24 am; edited 2 times in total |
|
Back to top |
|
|
trinjar
Joined: 24 Apr 2010 Posts: 3
|
Posted: Sun Apr 25, 2010 2:15 pm Post subject: |
|
|
Ah, yes URC-7525.
And Ive tried a lot of codes now. Some of them, like 10178, let me control the TV. So far so good.
When I press the Magic button to send the code (00018) in the next step it seems that the remote switches from TV to SAT control. And that about it.
I dont think it possible to send EFCs with this remote, at least not with the magic button.
Thanks for the replay.
/Simon |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3371
|
Posted: Sun Apr 25, 2010 8:59 pm Post subject: |
|
|
We have some information about the 7525 here, and it appears that it is a 2 device remote (TV and SAT), with somewhat limited capabilities compared to most OneForAll remotes.
However, it has been reported here that the remote supports keymoves.
That means that you can semi-permanently assign an EFC to a button. So choose two buttons (e.g. Vol+ and Vol-) to assign the 00018 and 00019 EFCs to. Then, with setup code 10178, and in TV mode, do the following steps:
1) Press Magic until 2 blinks
2) Enter 994 (the remote should blink twice)
3) Press Magic briefly
4) Enter 00018
5) Press Vol+
The remote should blink twice to indicate that it accepted the EFC.
Repeat using 00019 and Vol- (or other buttons-- but stay away from buttons which only make sense for SAT--they may not work in TV mode.)
Now anytime you press Vol+, the remote will send the EZ-Adjust signal.
If you would like to restore the remote to normal:
1) Press Magic until 2 blinks
2) Enter 994 (the remote should blink twice)
3) Press Magic briefly
4) Press Vol+
5) Press Vol+ (yes, twice)
Should get two blinks. |
|
Back to top |
|
|
trinjar
Joined: 24 Apr 2010 Posts: 3
|
Posted: Mon Apr 26, 2010 1:24 pm Post subject: |
|
|
Yay! It worked! Thank you very much!
Keymoves is a nice feature, it looks like this remote isnt crap after all
Thanks for your time /Simon |
|
Back to top |
|
|
nimitz
Joined: 16 May 2010 Posts: 4
|
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun May 16, 2010 8:41 pm Post subject: |
|
|
You must have edited your post since I last looked at it. The urc-8820 comes in two flavors the urc-8820 b00 and the urc-8820n. Both are capable of doing the hack.
I didn't check out what you found at RadioShack, but the known RadioShack JP1 remotes have been discontinued so its going to be difficult to find a UEI manufactured RadioShack remote. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Last edited by vickyg2003 on Sun May 16, 2010 9:06 pm; edited 1 time in total |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3371
|
Posted: Sun May 16, 2010 8:46 pm Post subject: |
|
|
The URC-8820N (your first link) will work just fine. In fact, it is a very good remote for more than just enabling the USB!
The Radio Shack remote will not work. |
|
Back to top |
|
|
nimitz
Joined: 16 May 2010 Posts: 4
|
Posted: Sun May 16, 2010 9:06 pm Post subject: |
|
|
Thanks. I just use the advice you gave here and it should work with mine correct?
3FG wrote: | We have some information about the 7525 here, and it appears that it is a 2 device remote (TV and SAT), with somewhat limited capabilities compared to most OneForAll remotes.
However, it has been reported here that the remote supports keymoves.
That means that you can semi-permanently assign an EFC to a button. So choose two buttons (e.g. Vol+ and Vol-) to assign the 00018 and 00019 EFCs to. Then, with setup code 10178, and in TV mode, do the following steps:
1) Press Magic until 2 blinks
2) Enter 994 (the remote should blink twice)
3) Press Magic briefly
4) Enter 00018
5) Press Vol+
The remote should blink twice to indicate that it accepted the EFC.
Repeat using 00019 and Vol- (or other buttons-- but stay away from buttons which only make sense for SAT--they may not work in TV mode.)
Now anytime you press Vol+, the remote will send the EZ-Adjust signal.
If you would like to restore the remote to normal:
1) Press Magic until 2 blinks
2) Enter 994 (the remote should blink twice)
3) Press Magic briefly
4) Press Vol+
5) Press Vol+ (yes, twice)
Should get two blinks. |
|
|
Back to top |
|
|
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Sun May 16, 2010 9:14 pm Post subject: |
|
|
Both versions of the 8820 have TV/0178 code built in. The instructions you are referencing uses 5 digit setup codes 10178, but your remote only uses 4 digits. 0178.
Your Set key is the Magic key.
So follow the instructions in the manual to setup TV code 0178 and then follow the keymove instructions. _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
|
nimitz
Joined: 16 May 2010 Posts: 4
|
Posted: Tue May 18, 2010 5:59 pm Post subject: |
|
|
thanks vicky and 3fg... worked perfectly and now i'm trying to figure out what other things this nice remote can do. |
|
Back to top |
|
|
|