Azbox Premium HD satelite receiver

svenne · Post by **svenne** » Sat May 01, 2010 3:21 am

Can somebody help me with a code to get the right remote control for this device.

Device:Azbox premium HD
Type of device: Satelite reciever
Year: 2010?
Remote model:Standard (no numbers on it)
JP1 cable:?
Still have original remote:yes

Capn Trips · Post by **Capn Trips** » Sat May 01, 2010 4:13 am

You're apparently a new forum member, but I would recommend that you read the Beginner's Read this First thread in the Beginner's Forum. Then you might be able to post a question that somebody can help you with - or better yet, help yourself.

There is an upgrade for an AZbox in the upgrade file section which would doubtless work for you, but without knowing what remote you have, we do not even know if your remote is a UEIC-manufactured remote, which are the only remotes discussed and supported in this forum.

It sounds as if your remote is NOT manufactured by UEIC, and is therefore not a JP1 (or JP1.2 or JP1.3) remote, so I doubt there is anything we can do to help at this point.

Post by **vickyg2003** » Sat May 01, 2010 4:45 am

The AZBox uses a nec 206/95 signal. This upgrade is not built into any UEI remote, and only a handful of remotes are capable of backdooring this in with EFC's. The 10820b00,8820b00,6820b00,Atlas 1025 and the RadioShack 15-2144 have a code that we could use EFC's on, but these are not current remotes, and would need to be purchased secondhand. Unless you have a UEI remote that accepts WAV files, if you really want to control this AZ Box with a universal remote, it looks like you'll need to become a full fledged JP1er.

svenne · Post by **svenne** » Sun May 02, 2010 4:11 am

I found only these numbers on the remote:W09.19.20

wnewell · Post by **wnewell** » Sun May 02, 2010 11:25 am

svenne wrote:I found only these numbers on the remote:W09.19.20

What kind of remote is this? Does it have a name on it? Maybe if you search some of the remote sites you'll find a matching one. Or maybe if you post pictures of it someone will recognize it. It might be a lot easier just to purchase a new learning remote to use. You can get learning remotes for about $10 or less on ebay.

3FG · Post by **3FG** » Sun May 02, 2010 12:16 pm

svenne,
Can you clarify what you are trying to do?
Do you have already a universal remote that you want to program to control the Azbox?

Or are you trying to identify a suitable universal remote to buy?

Do the numbers W09.19.20 refer to the Azbox remote, or to a universal remote?

svenne · Post by **svenne** » Mon May 03, 2010 4:43 am

I am trying to control my Azbox HD Premium satelit reciever through a Slingbox Pro over the internet, and looking at the slinbox homepage I am not able to find the remote for Azbox.
The original remote control has only the numbers: W09.19.20 on it and the letters AZ BOX on the front.

jimdunn · Post by **jimdunn** » Mon May 03, 2010 5:13 pm

svenne wrote:I am trying to control my Azbox HD Premium satelit reciever through a Slingbox Pro over the internet, and looking at the slinbox homepage I am not able to find the remote for Azbox.
The original remote control has only the numbers: W09.19.20 on it and the letters AZ BOX on the front.

There are Slingbox files for an Azbox HD Premium at this link:
https://www.hifi-remote.com/forums/dload ... le_id=7334

If you don't know how to use those files then this document by Alan Richey should help you:
https://www.hifi-remote.com/forums/dload ... le_id=6413

Let us know if it works for you, or if you have any more questions.

jartok · Post by **jartok** » Mon Aug 02, 2010 10:30 am

Hi i know this is a few months old but i really need help i got my slingbox sorted and all but there is the exit button missing with this file and i can not change satellite without it and im lost

im using the eu remote

picture of remote and button needed here

can anyone help

thanks

alanrichey · Post by **alanrichey** » Mon Aug 02, 2010 2:51 pm

Are you using the Slingbox built-in remote or the Custom Remote I produced for this box ?

johndegr · Post by **johndegr** » Sun May 15, 2011 12:19 pm

I ues the S2010 that works fine but it misses the exit buttom and that one you always need to get out.

Someone knows how or where to do this.

John

alanrichey · Post by **alanrichey** » Mon May 16, 2011 2:39 pm

Me

I suspect this is an old remote that was built using an RDF file that was very 'buggy', one symptom of which was a disabled Exit button.

Can you point me to the download link you used, so I can rebuild it ?

Al

alanrichey · Post by **alanrichey** » Tue May 17, 2011 3:57 am

Actually I have assumed you used this one:

https://www.hifi-remote.com/forums/dload ... le_id=7334

So I have rebuilt the BIN files. As before, put them in your \SBAV\ folder and re-run the video setup.

Cheers

Al

johndegr · Post by **johndegr** » Tue May 17, 2011 11:55 pm

Thanks, go changing them.

I saw when i uses the stop button, is like simular as the exit, but the normal buttom i prefer to use.

johndegr · Post by **johndegr** » Wed May 18, 2011 12:08 am

I tried your
https://www.hifi-remote.com/forums/dload ... le_id=7334

it has 190 bytes, but has the same result, where is the modified file?

Still missses the exit very badly

greets,

John

JP1 Remotes

Azbox Premium HD satelite receiver

Azbox Premium HD satelite receiver

Azbox Premium

Re: Azbox Premium

Azbox

Re: Azbox