JP1 Remotes

[slowgrind]

1. Device: Sanyo DVR-SD450
2. Type of device: DVD RECORDER/FREEVIEW TUNER
3. Year: 2005
4. JP1/UEI Remote model: URC-7781
5. Do you have a JP1 cable? YES
6. Still have original remote? NO
7. Checked the file section? YES
8. Checked Pronto file section (at R/C)? YES
9. Partially working setup code? NO
10. Learning remote question? YES


Hi,

Cant find anything that works with Sanyo DVR-SD450, have JP1 cable and
All 4 one URC-7781, none of the factory codes work, no CCF files or anything.
Does anyone have clues where to get codes for this device.

Thank you
slowgrind
at gmail

[vickyg2003]

This is just the situation that the Lookup Tool was set up for. Cable 1219 looks like it might be what you need. Its a new code, introduced with the JP1.3 remotes, and only used be sanyo. There is nothing like it in your remote.

Try setting up an upgrade with the information you'll find in the Cable 1219 device.

If you need help with setting up the upgrade let us know.
_________________
Remember to provide feedback to let us know how the problem was solved and share your upgrades.

Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.

[wnewell]

There's lots of Sanyo DVD/VCR codes in the file section. one of them might work. Otherwise you can by an original remote for the unit and then create an upgrade. Not sure how good this price is, but...

http://www.findremotes.com/remote-controls-1/remote-controls-dvrsd450-control-42067.htm

[slowgrind]

[mdavej]

Open RM. Select your 7781 remote. Find Cable 1219 with the lookup tool. Enter the protocol, device and subdevice into RM. Click EFCs in the results of the lookup. Enter each EFC for each function in RM. Copy/paste the resulting upgrade and protocol code from RM to IR. Assign 1219 to one of your device buttons in IR.