1. Device: Active 5
2. Type of device: tv amplified remote controlled directional antenna
3. Year:2008
4. JP1/UEI Remote model: RS 15-2117
5. Do you have a JP1 cable? Yes
6. Still have original remote? No
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)? Yes
9. Partially working setup code? no
10. Learning remote question? na
Manufactured by DX Antenna Co, Kobe Japan under several brand names
Sharp DTA-3500 Antenna
Moderator: Moderators
Sharp DTA-3500 Antenna
.......John
-
vickyg2003
- Site Admin
- Posts: 7104
- Joined: Sat Mar 20, 2004 12:19 pm
- Location: Florida
- Contact:
Have you tried the Channel Master Upgrade?
Older models of the DX Antennas used to use Cable/41 and Cable/65, both NEC1 118 types. Power = EFC.234 in both upgrades but the numeric buttons are quite different. 9 = efc.041 in Cable/41. 9 =efc.245 in Cable 65. Cable 41 has recently made a comeback in the JP1.2 remotes, so this might be worth a shot.
Older models of the DX Antennas used to use Cable/41 and Cable/65, both NEC1 118 types. Power = EFC.234 in both upgrades but the numeric buttons are quite different. 9 = efc.041 in Cable/41. 9 =efc.245 in Cable 65. Cable 41 has recently made a comeback in the JP1.2 remotes, so this might be worth a shot.
Last edited by vickyg2003 on Sun Aug 16, 2009 9:38 am, edited 1 time in total.
Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
-
vickyg2003
- Site Admin
- Posts: 7104
- Joined: Sat Mar 20, 2004 12:19 pm
- Location: Florida
- Contact:
I was editing my post when you posted. I'm hoping to hear that you found a solution.
Give this a try CBL-0041
Give this a try CBL-0041
Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Re: Sharp DTA-3500 Antenna
Found a match and recorded the IR signals with the JP1 tools to create the respective files. This one is a little odd because it seems to interleave RC5 signals in between F12 but only for two of the four available commands. I decided to create an RMDU file based on the F12 signals. If this doesn't work then we'll push this into the protocol decode forum with hopes that someone can create an executor for it.jwcldwll wrote:1. Device: Active 5
4. JP1/UEI Remote model: RS 15-2117
5. Do you have a JP1 cable? Yes
Manufactured by DX Antenna Co, Kobe Japan under several brand names
Remotes; JP1.2: Comcast URC-1067, JP1.3: Insignia NS-RC02U-10A, JP1.4 OARI06G, JP2.1: Cox URC-8820-MOTO (still trying to figure out how to make them self-aware.)