Help needed with D-Link DSM-510 protocol issue.

[rcausey]

Hi,

I am attempting to build a custom remote file for a Slingbox solo to control a D-Link DSM-510 media player. Using Remote master I have been able to assemble a remote definition that works extremely well, except for one issue that I have not been able to figure out. The arrow keys (up, down, left, right) when pressed seem to be producing a double key press. For example if I am viewing a list of movies and I press the down button, the cursor moves as though you had pressed the down arrow twice. Instead of moving from entry 1 to 2, it moves from entry 1 to 3. (Hope that makes sense.)

I have posted the files in the diagnostic area and here is the link:
https://www.hifi-remote.com/forums/dload ... le_id=6946

If someone could take a look at the definition and tell me what I am missing, or doing wrong I would appreciate it.

How I got to this definition:
I basically took a look at the various files for other d-link models and assembled a prototype definition. From there through testing, trial, and error I was able to work out the key mappings from the original D-Link remote to their slingbox counterparts. The keys in the definition file that are prefixed with a dash(-) I have not been able to validate as I do to not having a way to exercise them. IE. The factory D-Link remote has number keys but the user interface does not use them. I currently do not have a JP1 remote or cable.

TIA,
RC

[eferz]

I am attempting to build a custom remote file for a Slingbox solo to control a D-Link DSM-510 media player. Using Remote master I have been able to assemble a remote definition that works extremely well, except for one issue that I have not been able to figure out. The arrow keys (up, down, left, right) when pressed seem to be producing a double key press. For example if I am viewing a list of movies and I press the down button, the cursor moves as though you had pressed the down arrow twice. Instead of moving from entry 1 to 2, it moves from entry 1 to 3. (Hope that makes sense.)

Found a match and recorded the IR signals with the JP1 tools to create the respective files below. To overcome the repeated signals, I used Rob's special non-repeating NEC protocol from this post (https://www.hifi-remote.com/forums/viewt ... 0797#p90797)

• ICT file: https://www.hifi-remote.com/forums/dload ... e_id=10340
• RMDU file: https://www.hifi-remote.com/forums/dload ... e_id=10341
• BIN files: https://www.hifi-remote.com/forums/dload ... e_id=10342

BIN file Instructions.

• Mac: http://support.slingbox.com/get/KB-1000223.html
• PC: http://support.slingbox.com/get/KB-1000218.html

Customization instructions:

• http://slingbox.wikia.com/wiki/How_to_c ... te_upgrade