JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Problems using the simple parallel cable? Read this.
Goto page Previous  1, 2
 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Beginners
View previous topic :: View next topic  
Author Message
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3953

PostPosted: Fri May 15, 2009 9:46 am    Post subject: Reply with quote

You're right, Rob, although DIY's marketpplace listing does not mention it, it's listed on this page.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes:Atlas OCAP URC 1056, Harmony One, OFA XSight Touch, AR XSight Touch
TVs: Panasonic TH-50PE700U; LG 65" Smart LED TV; RCVR: Pioneer VSX-D2016S;Onkyo TX-SR875
DVD/VCR: LG Blu-Ray player, Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A1 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc/CD changer: Pioneer CLD-704.
Streaming: Intel NUC PC
(But I still have to get up for my beer)
Back to top
View user's profile Send private message Send e-mail
samkrit



Joined: 14 May 2009
Posts: 4

PostPosted: Fri May 15, 2009 4:12 pm    Post subject: Reply with quote

My Cox remote has the following inside of the battery compartment:
Next to the 6-pin connector, it says "JP 1.1" and "1003" and then Pin Numbers.
On the side of the compartment it says "URC-7820B00SA" and "09711" and "Z064004 A 000058 LF".

I assume that it is a Cox type 7820B remote. I plan to get in touch with DYIgadget.com and see if I can exchange the JP1 Parallel cable for a JP1.1 Serial cable.

Sam K.
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3693

PostPosted: Fri May 15, 2009 5:02 pm    Post subject: Reply with quote

Remote chart and RDF indicate it's really JP1.3 and learning. Can anyone else confirm?

If so, you should exchange for a JP1.3 cable unless you want to to the mod Rob mentioned. This is a pretty nice remote, with plenty of memory. Nice shape and key layout too.

See THIS thread to test and see if it's learning. Learning will be very useful in JP1 programming.
Back to top
View user's profile Send private message
samkrit



Joined: 14 May 2009
Posts: 4

PostPosted: Fri May 15, 2009 5:13 pm    Post subject: Reply with quote

I followed the instructions in the link to see if my remote will "learn", and it did not behave as the link suggested. Also, it is clearly labelled "JP 1.1" inside. Any further thoughts?
Back to top
View user's profile Send private message
mdavej
Expert


Joined: 08 Oct 2003
Posts: 3693

PostPosted: Fri May 15, 2009 5:22 pm    Post subject: Reply with quote

In that case I'd go for the JP1.1 and convert it to JP1.3 if necessary.
Back to top
View user's profile Send private message
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3953

PostPosted: Fri May 15, 2009 8:26 pm    Post subject: Reply with quote

It's not the one we CALL the 7820B, because that is most definitely a JP1.3 remote (I'm looking at one in my hand right now). The one we call 7820 is a JP1.2 (but I don't who has seen that one) and a JP1.1 variant would be a previously unseen one, afaik.

After you get the JP1.1 cable, you'll have to do a download and an rdf will have to be developed.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes:Atlas OCAP URC 1056, Harmony One, OFA XSight Touch, AR XSight Touch
TVs: Panasonic TH-50PE700U; LG 65" Smart LED TV; RCVR: Pioneer VSX-D2016S;Onkyo TX-SR875
DVD/VCR: LG Blu-Ray player, Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A1 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc/CD changer: Pioneer CLD-704.
Streaming: Intel NUC PC
(But I still have to get up for my beer)
Back to top
View user's profile Send private message Send e-mail
binky123
Expert


Joined: 14 Feb 2004
Posts: 1291

PostPosted: Fri May 15, 2009 11:18 pm    Post subject: Reply with quote

Perhaps, try the SET-983 command to blink back the signature. Press and hold SET and wait for 2 blinks. Press 983. Then Press 1 for the first digit of the signature(count the blinks). Press 2,3,4 for the rest of the signature.
Back to top
View user's profile Send private message
kupakai



Joined: 29 Sep 2006
Posts: 283
Location: New York

PostPosted: Sat May 16, 2009 3:42 am    Post subject: Reply with quote

samkrit wrote:
My Cox remote has the following inside of the battery compartment:
Next to the 6-pin connector, it says "JP 1.1" and "1003" and then Pin Numbers.
On the side of the compartment it says "URC-7820B00SA" and "09711" and "Z064004 A 000058 LF".

I assume that it is a Cox type 7820B remote. I plan to get in touch with DYIgadget.com and see if I can exchange the JP1 Parallel cable for a JP1.1 Serial cable.

Sam K.


I have that exact remote. In fact, I made the RDF file for it (well, actually binky123 did all of the hard part). It's a JP1.2 remote and it's the one that is labeled as Cox URC-7820 here, not the JP1.3 "B" version. Even though it is labelled JP1.1, it is what we would call here JP1.2 because it uses HCS08 processor. There are a couple of remote models like that.
Back to top
View user's profile Send private message Send e-mail
Capn Trips
Expert


Joined: 03 Oct 2003
Posts: 3953

PostPosted: Sat May 16, 2009 6:16 am    Post subject: Reply with quote

If that's the case, then ANY of the previously-mentioned vendors' JP1.X cable would work for you. My personal favorite is Tommy Tyler's USB version.
_________________
Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!


Remotes:Atlas OCAP URC 1056, Harmony One, OFA XSight Touch, AR XSight Touch
TVs: Panasonic TH-50PE700U; LG 65" Smart LED TV; RCVR: Pioneer VSX-D2016S;Onkyo TX-SR875
DVD/VCR: LG Blu-Ray player, Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A1 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc/CD changer: Pioneer CLD-704.
Streaming: Intel NUC PC
(But I still have to get up for my beer)
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Beginners All times are GMT - 5 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central